Pastyface, KarateShop, Mudbunny, Dirtbaby, Wolfshirt, PigButt and Cherrybomb now in stock!
I have some document updating to do which will involve some BOM changes. Luckily I started a few days ago so I should have everything finished and uploaded by tomorrow. But, I would hold off on any parts orders until then. For instance, the Pastyface now has the charge pump on-board but no longer has the option for axial caps, the Karate Shop now has a 50k Vol pot, the Wolfshirt and Cherrybomb replaced some electros with 1uF film caps, the Dirtbaby is now rev.1 (only change is I removed the Tails option which was a bust) etc.
Pics of the new boards are up, too. Just click on the thumbnails for full size.
Time for a new storage container. Only one little wee spot left on these.
Which also means I've got more projects in stock now than any other time. So, there's that.
That is a cool picture :)
Awesome picture. I always wondered what the Madbean PCB Honeyhole looked like. ;D
I really like the large drawers on them. Very cool indeed.
Cody
please! we need tap tempo delay and tremolo!!
Bean HQ!! That's where the magic happens.
Sent from my iPhone using Tapatalk
I helped clear out some of your storage space. ;D
Quote from: pietro_moog on March 16, 2015, 03:50:13 PM
please! we need tap tempo delay and tremolo!!
Dude....every one of these announcement threads I post you always come in and ask for something else, haha. I cannot please, but I will try to abide.
Yeah, I'm gonna have to go ahead and ask you whip up a PCB for a tube amp with tap tempo tone control.
I am hoping the BOM for the freekout is up soon so I can order anything I need with my next order of parts. Any idea when the new projects will be up?
Quote from: culturejam on March 16, 2015, 06:56:49 PM
Yeah, I'm gonna have to go ahead and ask you whip up a PCB for a tube amp with tap tempo tone control.
can there be a mids mod and sync that to the tap too?
KarateShop doc is up: http://www.madbeanpedals.com/projects/KarateShop/docs/KarateShop_2015.pdf
Did you say the Rust Bucket was in too? ;D
I'll take every board you have in sky blue. ;D
Steve.
Quote from: peAk on March 17, 2015, 08:05:01 AM
Did you say the Rust Bucket was in too? ;D
Poor man, Brian is playing with your feelings ;D
Update: PigButt, Dirtbaby, KarateShop and Mudbunny docs are updated. Pastyface, CherryBomb and Wolfshirt docs will be updated Wednesday.
I hate to be the one to say this but I don't like the new use of PCB mount switches instead of the old bigger holes, just simply because they're a lot harder to get here in Europe, not all of the suppliers carry them.
I populated the Flabulanche and DangerZone yesterday and clipped off one half of each solder lug on the old switches for them to fit, but the barely reach through the holes.
Sorry. Other that that: great.
Trem, thanks for the feedback. I was not aware of that. I'll think about that as I work on future releases.
The Pastyface and Cherrybomb docs are up. I will get the last one (Wolfshirt) up in just a bit.
Brian, thanks for sharing your picture of how you sort your pcb inventory, i've also been using part bins but the stackable type, yours makes a lot more sense..... will head up to the hardware store later this week.
Cheers
Rej
Quote from: GrindCustoms on March 22, 2015, 03:02:40 AM
Brian, thanks for sharing your picture of how you sort your pcb inventory, i've also been using part bins but the stackable type, yours makes a lot more sense..... will head up to the hardware store later this week.
Cheers
Rej
I have been doing exactly the same as bean. Got my bins at Harbor Freight. It really keeps everything organized.
cool stuff thanks :-)
any news on the small harbinger? or isnt that planned to be released yet? you make us hungry with the facebook posts haha
yeah i have to agree concerning the switch layout. pcb mount switches can be soldered in the bigger holes aswell but not the other way round
whats really hard to get are the small sized pots used in the deadringer (i know less space on the pcb). maybe some rearrangement could be done for the deadringer, for the fets, so that they can be bent down
i really love the pastyface withe the charge pump :-)
New boards are in:
(https://i.chzbgr.com/maxW500/8425029632/h572FAAD1/)
Quote from: luks999 on March 24, 2015, 12:41:57 PM
cool stuff thanks :-)
any news on the small harbinger? or isnt that planned to be released yet? you make us hungry with the facebook posts haha
I don't think it will make this next batch. The DB3 and Rust Bucket are going to cost some major bucks to manufacture, and there are others going at the same time. However, AKAIC the development on the small univibe is done so it will definitely go in the batch after, or in-between. I did get my special photocells today so I'm going to compare those to what I have in there in case I wanna make a recommendation.
thanks brian for the info 8) sounds good
Quote from: madbean on March 26, 2015, 02:28:56 PM
The DB3 and Rust Bucket are going to cost some major bucks to manufacture...
I don't know if that is an option for you, but I would be happy to pay for those two before hand and I bet many other active members here would too.
Quote from: m-Kresol on March 27, 2015, 12:55:17 PM
Quote from: madbean on March 26, 2015, 02:28:56 PM
The DB3 and Rust Bucket are going to cost some major bucks to manufacture...
I don't know if that is an option for you, but I would be happy to pay for those two before hand and I bet many other active members here would too.
ditto