Text only | Text with Images

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: Ariosto on August 29, 2017, 01:16:53 PM

Title: Need help with the 4:1 Compressor
Post by: Ariosto on August 29, 2017, 01:16:53 PM
Hi everyone,
I need to know where to solder the "G", "L", "I" and "O" cables in the Four One Compressor. I can easily assume that they are Ground, Input and Output, but still not sure about "L" (Line?). The PDF does not help too much, or my knowledge is insufficient. Please write me to:
cristian_fe@yahoo.it
Thanks in advance! Greetings from Germany!
Ariosto
Title: Re: Need help with the 4:1 Compressor
Post by: bsoncini on September 06, 2017, 01:18:04 PM
L IS for led. You solder that wire to the 3pdt so that the led turns off with the effect.
Title: Re: Need help with the 4:1 Compressor
Post by: madbean on September 06, 2017, 01:34:44 PM
http://www.madbeanpedals.com/tutorials/downloads/1590G_BuildGuide.pdf
http://www.madbeanpedals.com/tutorials/downloads/MBP_FootswitchWiring.pdf
Text only | Text with Images