I am trying to implement the feedback mod I've seen pictured so many times here, and am not quite sure I'm understanding things. The mod is described clearly here http://www.madbeanpedals.com/forum/index.php?topic=25510.0 (http://www.madbeanpedals.com/forum/index.php?topic=25510.0) but I am still too newb to understand some of the descriptions. As a visual person, is this the correct implementation of the mod as described?
(https://i.imgur.com/DoIbqc1l.jpg)
I feel like I'm probably missing something...
After re-reading a bunch of times and doing more research, I believe this is much closer to what is described in the post:
(https://i.imgur.com/qYjAMx7l.jpg)
You want to wire it like that I think
This way if you turn the trimpot fully cw it's like shorting pin2 & 3 of the fbk pot, and if you turn it a bit ccw it'll take more and more time to oscillate.
Thanks Boba7, your scheme might work, I didn't test it out because in the meantime I had help on another forum. What ended up working for me is this:
(https://i.imgur.com/tdIxcqgl.jpg)