Hi everyone,
I finished with the building of the Pork Barrel Chorus. The thing is, that I decided to get more headroom and made the "12 volt version".... After reading in the PDF instructions (maybe a bit too late), it says that I need a Road Rage Board, or a so-called 3prr Board (which in Germany are literally impossible to find. I cannot see neither of the two here in the Madbean website. The next solution should be to make a retrofit and make it plain 9v... Can anyone help me?
Thanks in advance,
Ariosto
Hi Ariosto,
If you go to the "Projects Page" and look in the section labeled "Other" you should see them. They're down near the bottom of the page in the orange/yellow section just above the "Tap Tempo" projects.
Stephen
Go here, near the bottom:
http://www.madbeanpedals.com/projects/index.html
Maybe the quickest would be to make one on vero/perfboard (any 18v charge pump followed by a 12v regulator would work)
I might have a roadrage board somewhere but I wont be back home until saturday, and Im not sure at all, but I'll let you know (I live in France)
I do have a road rage pcb if you're interested!