Gudday all. Here's Lightspeed, a Minitaur Klon and Afterlife compressor in a 125b. Had to do top mounted jacks as I couldn't fit it any other way. LEDs are hot glued in place, Afterlife is stuck to the rear of the Minitaur with doublesided tape. The enclosure is a Tayda powercoat with datapol sticker and a coat of clear. Not my best work or neatest guts, but it works...
Nice. How you do that graphic?
and who own minotaur? Pickdropper?
Hey Willybomb, is there a trick to getting the hot glue to stick to the aluminum? I tried this and the glue didn't stick.
Well there's a lot of shoehorning compression going on there.... well done to squeeze that all in!
Now you need small enough shoes to deal with the two foot switches...
I think I'd be saying "punch it, Chewie" in my head every time I stomped it. :D
QuoteNice. How you do that graphic?
and who own minotaur? Pickdropper?
Yeah, it's a Pickdropper PCB. I think I bought it last year.
The graphics are stolen off the internet, and from there I do my layouts in photoshop using the hardware vector libraries. It gets laser printed on Datapol sticker paper (it's basically the stuff they use for car bumper stickers), and given a clearcoat or 3.
QuoteHey Willybomb, is there a trick to getting the hot glue to stick to the aluminum? I tried this and the glue didn't stick
In this case I put glue on the sides of the LED, quickly jammed it in the hole (well, jammed isn't the right word as the hole is probably a mm too large) and followed up with more glue. In my Black Gate and Dual Booster builds I just used lots of it.
1. Awesome work!! This is a great pedal, very well excited.
2. I need to build something like this so I can call it a KLOMP
QuoteI need to build something like this so I can call it a KLOMP
Lol, I believe the correct term is "Klonpressor".