Print Page - Okko Dominator switch

Title: Okko Dominator switch
Post by: drog_trog on June 25, 2018, 06:23:04 AM

Is it a SPDT on-off-on or SPDT on-on-on thats used in this, here is a schematic i found and also the dominatrix to compare

(https://s15.postimg.cc/5j79iksh3/OKKO_DOMINATOR_cir_1.jpg) (https://postimg.cc/image/5j79iksh3/)

(https://s15.postimg.cc/6b9xhr9iv/Capture.png) (https://postimg.cc/image/6b9xhr9iv/)

Title: Re: Okko Dominator switch
Post by: zombiesonore on June 25, 2018, 11:02:40 AM

After reading the thread at FST, I see an on/off/on SPDT...
Also, you can use a 1M pot for a full range selection.

Title: Re: Okko Dominator switch
Post by: drog_trog on June 25, 2018, 12:25:26 PM

thanks, I'm putting it in a 125B with top mounted jacks of course

Title: Re: Okko Dominator switch
Post by: tcpoint on June 26, 2018, 07:07:00 PM

It's a monster pedal. I love it.

Title: Re: Okko Dominator switch
Post by: juansolo on July 04, 2018, 01:18:26 PM

On the dominatrix derivative in the 2nd schematic, on-off-on.

Title: Re: Okko Dominator switch
Post by: drog_trog on July 05, 2018, 08:47:46 AM

Thanks

Title: Re: Okko Dominator switch
Post by: blearyeyes on July 07, 2018, 09:31:07 AM

If anyone reads this:
I have a question regarding schematics. If the switch is on-off-on and in the middle position no circuit is closed why does the schematic show ground?

madbeanpedals::forum

Projects => General Questions => Topic started by: drog_trog on June 25, 2018, 06:23:04 AM