madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: Vtguy22 on August 13, 2019, 04:23:53 PM

Title: Agua net switch question
Post by: Vtguy22 on August 13, 2019, 04:23:53 PM
I've got a question on the spdt switches  the Agua Net.  There are 3 lugs on the board, but it it looks like the third lug isn't connected to anything if I'm reading the schematic right.  Could I use a 2 lug on/off switch and not connect anything to the third lug?

Thanks in advance, Paul.
Title: Re: Agua net switch question
Post by: mikef on August 14, 2019, 02:01:58 PM
Aqua Baby, Aqua Boy and Aqua Deluxe( and an Aquaboy-BL on the etchers paradise side )is all I see on the shop for sale list. Are you asking about one of those?
Title: Re: Agua net switch question
Post by: Vtguy22 on August 15, 2019, 08:53:25 AM
No, it's a Diablo Chris board.
Title: Re: Agua net switch question
Post by: somnif on August 15, 2019, 07:49:18 PM
I suppose you could. If you read the schematic, you connect pins 1-2 for chorus, disconnect pins 1-2 for vibe. How you choose to accomplish that is up to you.