Thanks for the tip, I might go for this one. He ships two for the price and even with the shipping it seems to be then cheaper as it would be from Banzai (I'm in Europe, so that would be my primary pedal parts source)
- Welcome to madbeanpedals::forum.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#2
Tech Help - Projects Page / Re: Freekout rotoring sound
August 05, 2020, 09:34:40 AM
Hi Markus,
Your problem seems to be exactly like mine: the clean part works ok, on the effect path however there is only noise and the voltage regulators get extremely hot. Once the AD633 is removed, the regulators work again at normal temperature, while the voltages seem to be ok too. I got my AD633 from ebay, from a Chinese seller. Can I ask you what your "reputable source" was for the AD633?
Thanks,
Csaba
Your problem seems to be exactly like mine: the clean part works ok, on the effect path however there is only noise and the voltage regulators get extremely hot. Once the AD633 is removed, the regulators work again at normal temperature, while the voltages seem to be ok too. I got my AD633 from ebay, from a Chinese seller. Can I ask you what your "reputable source" was for the AD633?
Thanks,
Csaba
Pages1