Messages

Very nice buil !
...is it possible that you have the optocupler reversed?

I would try increasing C21 from 47pF to something like 100pF...

...the guy really insisted  and I'm not really a musician, I build pedals for fun, for friends or just to challenge myself...
Besides, I still have 2 Pangea boards to build the ultimate voodoo super vibe.

Hello !
This one was sold to a friend...
The enclosure in this one was an experiment, painted in black, gold and turquoise and then sanded down. I kind of like the result...
Sounds great, really great ! 
Hope you like it

Thank you all for your kind words 

...actually is just one CLANG ! (for letter) 

I use punches to label my stuff too. What do you use as a backing on the enclosure when you punch to prevent it from denting?

I'm using this :

Looks good.  How did you colour the lettering - it doesn't look like you have sanded down the top afterwards?   I'm impressed by how consistent it all looks.  Getting those letters lined up is not easy, I know.

It's simple, I just use a sharpie, let dry a little and then clean the enclosure with a tissue paper and some isopropyl alcohol...
I try to align the letters using a metalic ruler taped to the enclosure, that works for me,  but in general I try to simplify things...

That labelling is awesome!

Thank you ! It was my first attempt with punch letters. Anyway, I still don't know why I didn't put "bass, mid and trebble" below the pots 

...my second build report !
I have 3 Cascadia done, this one was the first and it sounds fantastic !!!
Boxed in a 150BB, just to challenge myself, I had to file a little the enclosure's lid.
I hope you like it !

If link don't work, I can send you a pdf

...do you mean Black Horse's Duplex Drive?

Very nice, especially the wiring

Are you from France? There seems to be quite a few Francophones with very good DIY skills.

Thank you !!
...to be honest I took some inspiration from Juansolo's builds.
I'm from Belgium by the way !

thank you !

Hello !
I've never posted a buid report before ( mostly due to my lack of confidence with my english skills) so here I go !
This one got me into the Madbean forum, the PCB was etched back in 2011, but I populated and boxed it a few weeks ago. Volume pot is a 50KA and C9 is 100pF instead of 1nF. D1 and D2 are AA113 (or AA143?) and 1N60P for D3 and D4...