Topics

 I would very much appreciate any help in obtaining these docs. I have searched the web all over the place, it seems you can buy the finished pedal, but nary a build doc in sight! I have been sitting on these for a good while (along with a few others, same company, same problem). I am looking at small boards for onboard installs.

When testing (Rocking it before I box it), I get what seems to be a boosted signal but no effect, The controls do nothing (rate and depth) and the indicater LED stays lit with no pulse for rate. The chips I'm using were obtained through Smallbear. They are v3207,v3102 I also got a set of bl3207, bl3102 and I have tried both with the same result. I have carefully checked for bridges, poor joints, etc and can find nothing amiss. Jumpers are correct as well. I have gone through ic's and tran's checking voltages. From the schematic all seems well, I don't know what all of the ic voltages are but I checked the ones given in the schematic, i.e. DC voltage. There are no erratic readings either. I am pretty new at this but I'm getting better at the debug process, this one I don't have a clue. Any help would be appreciated.

I have recently ordered the Rebote 2.5 Delay from Oshpark and I can not find a BOM for this board. I have the tonepad stuff, but the board layout is different. I don't want to put the right parts in the wrong place! Any help would be greatly appreciated.