Topics

I've followed the instructables website and have an image but there's no way to move it around. Any tips?

I need the double aqua boy in my life.
*dramatic, forlorn look out the window, into the darkness*

I'm pretty sure this is it but would someone mind checking my schematic?

Trying to get a + and - 9v for a ad781 bit crusher project going.

Got this code in the email

NEW2P

They said it can be used as many times as you like and to share it with whomever you like! Figured I'd pass it on!

Any idea when he doc will be available?

The first half of my aristocrat build sounds gated. If you hit the strings softly nothing happens, if you hit em real hard it gives a fuzz noise then cuts out. I rechecked all my components and they are correct. When I place my finger on the circuit side around the Gain pot I get more signal, but it almost seems like too much. Has this happened to anyone else?

First powdercoat! Came out alright I think...looks machiney!

Where do you guys get your pf capacitors from? Small bear has them but (please don't take this the wrong way) I feel so used paying 30-40 cents for a capacitor.
Ceramics are easy enough to come by but pretty cheap and silver Mica are expensive and often too large.
Any help would be appreciated!

I know these can get costly but I just got a bunch of em for about .93 cents per from Newark.com

Just a heads up if your in the market, I think this is a good price!

Le sigh. I knew too many smart phones would make the internets break.

I bought my ICs off of Ebay and I'm pretty sure this is where I messed up.
It works fine but the modulation is fast, as in ring mod fast.
I have changed C30 to 1.47uf and it has slowed down into usable territory, but this is a much larger value than the stock 100n. There is some bass loss, but I don't know if this is inherent in the circuit.
Has anyone else dealt with this or have any opinion on whether or not I have been burned?

I'm going to be running this project at 18volts via the Roadrage, but the only cap I have rated above 18 volts is a 220uf. I'm pretty sure this is an OK substitution for the 100uf (I think its called a DC filter cap) but if anyone could confirm I would be much obliged.

 So the effect passes signal in bypass mode, but when I switch it on the signal goes as far as R5 and stops. I've replaced this resistor and still nothing. Any suggestions would be greatly appreciated, has this happened to anyone else?