Topics

Hi,

For a TB mod on an Ibanez DL10 Delay, the effect needs to be in Always On mode. Can someone tell me how to do this? I think I need to jumper a transistor or remove a transistor or so but if so, which one?

I cannot find a schematic of the DL10 but some claim that the DL5 is (almost) identical:
http://experimentalistsanonymous.com/diy/Schematics/Delay%20Echo%20and%20Samplers/Ibanez%20DL5%20Delay.gif

Does someone knows? I appreciate your help!

Hi all,

I know this is a long shot since I know it is a digital circuit but is it possible to modify the "wow and flutter" on this pedal? From all the delays I have owned through the years, this is the best sounding but I get a tooth ache from the wobble that is always present when the pedal is engaged. Even at the lowest repeats and "age" setting it feels like it thinks I am a U2 fan. Not. The stomp box comes with many features like tap tempo, internal stereo and trail settings but it seems that they forgot to implant a trim pot or switch for the wobble. Unfortunately I cannot find a schematic online. Anyone out there can help?

Does anyone knows if it is possible to add a tap tempo switch to a Surfy Trem? (http://surfybear.weebly.com/blog/harmonic-tremolo-using-jfets).

Hi ya'll,

this is my first post here and have a question. I am a noob and wanted to see if I could build a fx pedal myself. I was a bit superfluous to start off with a ROG Supreaux Deux v.1.3. So it took me three days, 1 to build it and 2 to troubleshoot. I managed to get it working, finally, it sounds fantastic! But...if I check the test points I only measure between 5 and 8.5 volts. This is the version with the voltage doubler. I have checked for solder bridges, cold soldering joints etc. but cannot find the culprit. What am I doing wrong? Did I screw up some parts?   

Can someone please tell me what the best way is to find the culprit?

This the version I used:  http://diy.thcustom.com/?wpdmdl=3231