Messages

I managed to get the pcb layout from the FSB post let me know if you are interested. If you found another I am also interested because I feel like I never have time to etch.

Nope bought everything to spec and all the voltages are similar to the build specs. I feel like maybe it isn't working and I was over zealous? I dunno I feel like I hear compression come in and out while adjusting things. When I get a chance to head to the bench I will take pictures.

Yeah I have been meaning to reply to my earlier post I am still not sure if mine is working. I have no clue what it is supposed to sound like but the voltages that I measured are similar to what was measured. I felt like it I had it working but I got a bandmate to play yesterday while I adjusted and I feel like it was doing nothing noticeable.

So eventually figured out the issue the led on the switching board was turned up too high resulting in the compressor not turning on gradually. I also noticed that the switching board led trimmer controls the effect level not sure if this is normal.

I would also love to have a beta preamp as well.

I would love one of these as well VFE builds are fun.

Yeah I figured I would try the higher valued cap because it looks like a filter cap to me but I am not as experienced in these things.

I forgot to order 150 uF electrolytic capacitors  for the Pinball build. I am new to this but it looks like a power filter cap I have 220 uF and 100 uF caps could I use one of these instead?

What settings were you not fond of? I may socket somethings in my Palisades variant, because I am generally not a huge fan of hard clipping.

Perfect ordered some! Did you sand the backs to get them to sit flat?

Where did you get these black copper boards I found some on Ebay. I would love to try this.

Love your etches and builds. What are you using as an anvil for stamping? I am having a hard time juggling everything while trying to position and hold the enclosure over my anvil (another hammer face) and strike the stamp.

This is what I did for some Vfe project just combined a C10 with a C100 dual.

I have yet to find a great source of led footswitches. I have had some flake out on me I will never buy them again.

Yep been busy and wanting a Brass Master for practice and was thinking of taking the easy way out.