News:

Forum may be experiencing issues.

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - lego4040

#1
John D Cronise uses a Metal Muff from Electro Harmonics. Is there any info on making one of these? Is it a Big Muff version with special tweaks? If so how do I get that sound other then buying that pedal, that's not fun. I want to build it
Winter is back here in Buffalo Ny
#2
Build Reports / Re: Jmk test rig V2
March 08, 2024, 09:11:59 PM
Waiting for my board to arrive, ordered last Thursday but I haven't been updated with a shipping information yet. 🤔 I'll have to reach out, was hoping to start this weekend. That's is an awesome enclosure there and build
#3
General Questions / Re: JMK Test Rig
March 03, 2024, 02:41:26 PM
Itll be on the bench for sure, getting too old to be constantly bending over to tweak knobs. If I can find right switch I'll use a 3pdt toggle instead of stomp as well
#4
General Questions / Re: Shein Ei Fuzz
March 03, 2024, 03:24:54 AM
So, my bad on the pedal I was working on🥺, I got way ahead of myself. The pedal I was working on was the LoveDrive LesLuis off of Tagboard. I wound up with 2n906's at Q1(170hfe) Q2(190hfe) I set bias at 2.73kOms. I can't put my Tremulox past 1, well I can but damn.
The original post was for my BYOC with NOS O75's for Q1,2,3. That'll help me with a Burns Buzzaround with 0C83's I'll play with.
🙏
#5
General Questions / Shein Ei Fuzz
March 02, 2024, 10:56:08 PM
So I built this in 11/2016 with 2N3907's straight from tag board. I mad my own strip board from left over copper clad board. Anyone ever built one, have one?  I don't remember why I used 2n3907's, specs call for 3906's or similar. I have stash of transistors and want to change them out. Why? Way too loud and fuzzy.
Question 1: any preferences?
Question 2: hfe range for Q1 and Q2
Question 3: lower hfe first or last
#6
General Questions / Re: JMK Test Rig
March 02, 2024, 05:02:50 PM
I believe I have a few of both in my stash, I've been stocking up since my first pedal build(NeoVibe) close to twenty years ago, eeck. Thanks for all the help guys, I got a new coworker going down this rabbit hole now with pedals(hasn't built one yet) but test driving all mine. I lent him an original BYOC MKii(0c75) Shin ei Fuzz(I will post a quezon these later) a Moodring and a Nurse Quacky to rock out this weekend. His brother makes beautiful solid body guitars as well. Might hit him up for one of build
#7
General Questions / Re: JMK Test Rig
March 02, 2024, 02:49:25 PM
Thanks for info, I'm guessing that 3dpdt is a Standard stomp switch. The 2dpdt though, is that a on/on or on/off/on? If you remember the one you used or a link that be great.those spring loaded speaker terminals is a great idea, I was thinking of using good color coded alligators so I'd have room to move things around if needed, 🤔.
#8
General Questions / JMK Test Rig
March 01, 2024, 11:59:09 PM
So I ordered JMK's test Rig as parts needed to build mostly. I had the tiny tester, worked great but when I moved a few years ago I've seen to misplaced the rig, lost in a box somewhere. I've been out of the hobby for some time, jumped to tube amp building but wanted to get back into pedals and needed something simple for tone generator and amp. Any one else build and have some advice? I have the pdf for build out but looking for do's and don't. Like what kind of probe works best(I have old meter probes that'll work, I was thinking of maybe one medium/large enclosure with say 4" speaker(?ohm) built into it. Something along those lines
#9
Introductions / Re: Reintroducing myself
February 26, 2024, 12:41:40 AM
Haberdasher has made me boards before, I tried sending an email from an old transaction but email was no good anymore. I'll go to his profile and try again. Man did I forget a lot but thankfully when I first started out I created binders of printout instructions and information
#10
Introductions / Reintroducing myself
February 25, 2024, 11:54:31 PM
It's been a long time since I've even looked at a pedal let alone build one. I've moved cross NYS to just outside of Buffalo a few years ago, I got to build a real lab of sorts in my finished basement where I pretty much hoped I'd get back into this hobby. I mainly built tube amps for guitar and home stereo amps but that industry took a hit with transformers and I stopped new projects. Power transformers are t a problem, it's the output transformers that got real expensive and very few choices in the states outside of Hammond and Edcor. I did pull all my pedal builds out and started playing again, fixed quite a few broken ones too. I may sell off a few redundant ones to help pay for new pedals. My best fix was an old Aion Effects OD-855, it was a first run with error on board(easy fix). OMG the OD 855 is a incredibly powerful pedal, bye bye TS 808
Anyway I'm glad this sites still around so I can redive back in
PS-Are there any sources still for a Darkside?
#11
General Questions / Re: 1N60 substitue
November 09, 2017, 09:41:18 PM
 ;D
#12
General Questions / Re: 1N60 substitue
November 09, 2017, 06:01:11 PM
Thanks guys, i just went through my stash again and seems I am out off 1n34A's. I have 1n914's and 418 somethings. I'll stay away from the bay while searching, anyone know a good source? Ill also put up wanted add here for the 60's
#13
General Questions / 1N60 substitue
November 08, 2017, 10:41:21 PM
Im finishing up the Aion Cumulus OD and it calls for a 1N60, I thought I had 1N34a"s laying around but there hiding one me. Whats readily available these days
#14
Open Discussion / BC184 sub/equiv for Wizard of Doom
October 05, 2017, 05:04:48 PM
So I have a pcb coming called the Wizard of Doom. It's a sabbra cadabra on juice. It calls for a BC184(Q1) MPF4393(Q2-6) low gain npn germanium(Q7) Im asking for subs suggestions. BOM says(2N3904,2N5088) I have BC549c which looked pretty close. For Q2-6 BOM says(j201,2n5457's) Q7 I gotta did around my stash. I have a AC187 with 240 hfe
#15
General Questions / Re: Understanding LDR's/Mu-tron
October 03, 2017, 08:49:42 PM
Yeah, the tayda's are close to the 8002's but not as much sweep. I have them coming now and will swap out to see the difference