Messages

I'm building a ThunderPuss, and I'm using a Alpha angled pc mount 5k rev log pot. (mounted on top of the components)
When the pot is at minimum the volume is FULL-on, when I rotate it clockwise the volume turns to uniti gain after about 8'O clock and stays that way all the way.

What have i done wrong

Thanks everybody, this helps a lot.

wouldn't that feed negative ground into positive ground?
That might be right, I'm just trying to learn and understand what I'm doing.

I have never done a layout before, and i suck at reading schematics
Can you please be more specific? 

Thanks.
like this?

Do i have the polarity correct on all components?

ok, here we go, this is my first attempt to do a layout  
Will this work, or is this a "fatal destruction unit".
"In" is from normal negative center psu/battery.
I used the part numbering from the RoadRage pdfhttp://www.madbeanpedals.com/projects/RoadRage/docs/RoadRage_ver.3.pdf


I want to integrate it to my fuzzface. Now I have battery on/off switch where the dc-plug will be.

Thanks, I will try to do a stripped down stripboard-version that fit inside my existing FuzzFace then.

Sorry for bringing up this old thread.
Where can I get a regulator for the Road Rage? partnumber at Smallbear?

If I'm only going to use it to feed my 9v positive ground fuzzface, what components shoult i leave out?
Should jumper something?

Those look really good!

No, the box is from smallbear http://www.smallbearelec.com/Detail.bok?no=759

Thanks for all the kind words. 
Painting boxes takes so much time, and waterslide decal is difficult to work with.
With a Polished aluminium-box and permanent-marker with some colorful knobs  you'll can complete the whole build in hours instead of days

This is my first build with PCB-mounted pots, it's space saving and makes pedal clean inside.
If you look closely at the electrolytic cap you can see it's a bit messed up. (only cosmetic)
I had to use a file to trim the PCB a bit to make it fit in the box

Nice build!
What did you use for the artwork?
It's not waterslide since it's white? right?

Here is my first Madbean build, a boomstick, sounds great.
I kept the design simple