Messages

The FRH had (2) 100n 2.5mm caps listed in the BOM when in fact there are (3) needed. Doc has been updated.

...I'm counting four (4)...is it possible?

Thanks Brian!!!

Hello !
I have my Dreamtime built, working and sounding good (really good !). However I have a small question regarding the controls in the reverb mode. Controls seems to be different from the build documents, I'll try to explain:
Reverb amount is P0 (P2 in docs), Width is P2 (P1), Speed P1 (P0) and Blend sets the amount of wet signal. In delay mode the controls are like stated in the build documents...
Thanks !

thanks for the answers ! ...but I just put another order so I will wait for those low ESR caps (I'm planning to do some more VFE projects anyway).
Thanks again !!!

I forgot to include some 22µF low ESR in my last order from Mouser...Can I use regular low profile 22µF instead ?

just WOW ! I need one !

I just finished mine and it sounds really cool with R9 1K, C9 3,3nF and 2,2µF (MLCC) for C20...Great project !!!

 I had exactly the same LEDs issue and after a few days scratching my head I figured out the same fix...glad to know I wasn't the only one 

Happy New Year 2017 for everyone !!!
Best wishes from Brussels 

super nice guitar !!!
...never played one but I'm really thinking of getting a TVL Jazzmaster 

thanks !!! 

Hi !
I got my Lab Series preamp project up and running, it sounds really good ! I still didn't calibrate the trim pots, only set the compressor trim to cero.
But before I put it in the enclosure I have a couple of questions , just to verify that the preamp is working as it should.  One is the Limit function, I get maximum compression with the knob all the way down...and the other one is regarding the Hi-Lo switch, signal is boosted in "Lo" position...it's this the way it was intended...?
Thanks for your help 

I've got the 2.5kA pots from here:

http://uk-electronic.de/onlineshop/product_info.php?products_id=1080

...and the dual 100kC from here :

http://buildyourownclone.com/collections/parts-1/products/c-taper-16mm-dual-gang-pc-mount-potentiometer

...Thankx to Kevin for the advice 

was in my list of "will do" but never got the chance to source those 5106 bbd, appart from Banzai at €59.50...

C2 is correct, R5 22k seems to work for me 
Thank you Brian !!!