Author Topic: Changes to the Projects page  (Read 12450 times)

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 7524
  • Brian
    • View Profile
Changes to the Projects page
« on: June 01, 2010, 11:30:15 AM »
Folks,

I've been getting a few emails from some companies requesting that I remove their name from the website. I've gone ahead and done this for most of the projects, in anticipation of any future requests. While this may lead to some confusion, it is most likely unavoidable to some degree. I've done everything I can to be as descriptive as possible as to what's what. And, for the time being, the project documents themselves still name the actual design it's based upon. Just to re-iterate: these are DIY projects that are in no way affiliated with or serve as a replacement for any existing commercial product by any manufacturer. And, this forum is the only place you can expect to receive (happily) any response to questions regarding my projects or products.

If anyone has specific questions, or needs clarification, please feel free to PM me here in the forum.

Thanks!

I own madbeanpedals (duh). I am part owner of Function F(X).

Haberdasher

  • Electron Doctor
  • *****
  • Posts: 2746
  • "El Duder-ino"
    • View Profile
Re: Changes to the Projects page
« Reply #1 on: June 04, 2010, 10:25:19 AM »
Hi madbean

Thanks for the clarification.
What does it mean when a project is offline?

thanks

Looking for a discontinued madbean board?  Check out my THREAD

FABRICATED PCB's FOR SALE:

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 7524
  • Brian
    • View Profile
Re: Changes to the Projects page
« Reply #2 on: June 04, 2010, 10:33:06 AM »
Just that is unavailable for purchase at the moment. The documents can still be downloaded, however.
I own madbeanpedals (duh). I am part owner of Function F(X).

scdesigns

  • Transistor Tickler
  • **
  • Posts: 51
    • View Profile
Re: Changes to the Projects page
« Reply #3 on: June 11, 2010, 05:16:00 PM »
Any chance of you adding a what is what to the forums so we can find out what the RL equivelants are?

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 7524
  • Brian
    • View Profile
Re: Changes to the Projects page
« Reply #4 on: June 12, 2010, 09:19:45 AM »
I'll try and come up with a better formatting, but here's this in the meantime.

AquaBoy      AquaPuss / Boss DM-2
Aristocrat     KoT - dual channel
Blockhead    Digital Delay w/mods and tap tempo
Bloviator    Bajaman Sonic Stump
Boomstick    Box of Rock - single channel
Bumblebee    Baldwin Burns Buzzaround
Chunk Chunk     Dr. Boogey
Cupcake    Orange Squeezer
Darkside    G-2
Daytripper    Vox Night Train - pedal port
DeadRinger    Fulldrive Mosfet
Dig Dug     Ooh Wah
Dinky Drive     Bad Cat Mini II - pedal port
EgoDriver    OCD
Fallout    4049UBE Distortion - dual channel
FatPants    Echoplex Booster
Faultline    Catalinbread SFT
Firebomb    Super Duper 2n1
Gearhead    Secret Project
Glitterrattii    BB Preamp
Grapevine    Catalinbread Dirty Little Secret
Gristleizer    Gristleizer
King Kong     Univibe
King of [K]lones    KoT - single channel
Kokbox    Box of Metal
Komraad    Secret Project
Krankosaurus    Box of Rock
Macheen    Machine
Mangler    70's Fuzz
Milkshake    Slow Gear
Moodring    Belton-based Reverb
m-theory    Secret Project
Mudbunny    Big Muff
Mysterioso Jr.     Mosfet Overdrive - single channel
Neutrino    Eternity
Pangea    Carmen Ghia - pedal port
Pastyface    Soulbender
Pig Butt     Secret Project
Poindexter    Octane III
Pork Barrel    CE-2 with mods
Quasar    RC Boost
Rangemaster    Dallas Rangemaster
Road Rage     18v Charge Pump
Road Rage 2     18v (regulated) charge pump, 9v-, 9v+ supply
Sabertooth    Woolly Mammoth
Serendipity    Zen Drive
Silverfox    LTD Silver
Slambox    SHO
Slap Chop    Systec Harmonic Energizer
Slow Loris     MoD
Snack Shack     Meathead
Snarkdoodle    Red Llama
Squeeker    Green Ringer
Strange Attractor     Mobius Trip Looper
Sunking     Klon
Thumper    Dynamic Overdrive + MoD
Thunderpuss    Mosfet Booster
Tilt    jFet/Muff hybrid
Weener Wah     Clyde McCoy drop-in for the Crybaby
Yellow Shark    Honey Bee
Zombii    Fuzz Factory
Zygote    Dallas Arbiter Fuzz Face w/ mods
Zygote - mojo    Fuzz Face with mojo components layout
I own madbeanpedals (duh). I am part owner of Function F(X).

droptrd

  • Diode Destroyer
  • *
  • Posts: 5
    • View Profile
Re: Changes to the Projects page
« Reply #5 on: July 07, 2010, 10:17:57 AM »
This is great.    Thanks Madbean :)

Grendahl

  • Diode Destroyer
  • *
  • Posts: 3
    • View Profile
Re: Changes to the Projects page
« Reply #6 on: October 11, 2010, 10:44:05 AM »
Madbean,

I don't see the Uproar listed anymore. Is it due to the "presence" issue mentioned on FSB?

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 7524
  • Brian
    • View Profile
Re: Changes to the Projects page
« Reply #7 on: October 11, 2010, 10:53:42 AM »
Actually, it was never listed because it hasn't been offered here. I haven't followed the FSB thread for a while, but I am going to check up on it and go back over my layout. There are some value changes for me to make, as well. Just haven't had a chance to get to it yet.
I own madbeanpedals (duh). I am part owner of Function F(X).

Grendahl

  • Diode Destroyer
  • *
  • Posts: 3
    • View Profile
Re: Changes to the Projects page
« Reply #8 on: October 11, 2010, 11:11:01 AM »
Terrific, thank you MadBean!

night-B

  • Electron Doctor
  • *****
  • Posts: 646
  • Julien
    • View Profile
Re: Changes to the Projects page
« Reply #9 on: January 01, 2011, 01:06:20 AM »
I can't wait to see what the secret projects are !  ;D
I wish a happy new year, full of challenging projects to you guys

sjturbo

  • Diode Destroyer
  • *
  • Posts: 9
    • View Profile
Re: Changes to the Projects page
« Reply #10 on: February 17, 2011, 06:27:25 PM »
Keeping everyone happy is always difficult. Keep up the Great Work!!

Om_Audio

  • Solder Ninja
  • ****
  • Posts: 469
  • Clifford
    • View Profile
Re: Changes to the Projects page
« Reply #11 on: February 23, 2012, 04:05:27 AM »
I needed this list! Thanks!
C
Sent via soup cans and string.

Gaslighter

  • Diode Destroyer
  • *
  • Posts: 4
    • View Profile
Re: Changes to the Projects page
« Reply #12 on: April 30, 2014, 07:42:11 AM »
Is there a boost/overdrive pcb for bass available at the moment? Or will any/some of the ones for guitar do?


Sent from my iPad using Tapatalk

jkokura

  • Global Moderator
  • Electron Doctor
  • *****
  • Posts: 7326
  • Jacob - SK, Canada
    • View Profile
    • JMK PCBs
Re: Changes to the Projects page
« Reply #13 on: April 30, 2014, 10:32:44 AM »
Is there a boost/overdrive pcb for bass available at the moment? Or will any/some of the ones for guitar do?

Generally a guitar overdrive will work for Bass, though sometimes they need some modification to adjust to the lower frequencies. If you're looking for a specific drive, what are you looking for? If you're just looking for a Bass Overdrive to do, you could check out the JMK PCBs Big Bass Drive project.

Jacob
JMK Pedals - Custom Pedal Creations
JMK PCBs *New Website*
pedal company - youtube - facebook - Used Pedals

Gaslighter

  • Diode Destroyer
  • *
  • Posts: 4
    • View Profile
Re: Changes to the Projects page
« Reply #14 on: April 30, 2014, 08:27:23 PM »
Is there a boost/overdrive pcb for bass available at the moment? Or will any/some of the ones for guitar do?

Generally a guitar overdrive will work for Bass, though sometimes they need some modification to adjust to the lower frequencies. If you're looking for a specific drive, what are you looking for? If you're just looking for a Bass Overdrive to do, you could check out the JMK PCBs Big Bass Drive project.

Jacob

I was mainly looking for a bass boost but one which could also be overdriven. The only guitar boost pedal that I've used and liked has been the Hard On and I guess that's what I'm after for the bass but perhaps with a bit more drive at the end of the dial.

I had been looking at the JMK Big Bass Drive and I think I'll give it a go.
Thanks