News:

Forum may be experiencing issues.

Main Menu

Mississippi Drive aka Deadringer II

Started by brejna, March 24, 2015, 02:51:03 PM

Previous topic - Next topic

luks999

Quote from: brejna on March 24, 2015, 07:52:18 PM
Quote from: luks999 on March 24, 2015, 06:54:39 PM
fantastic job :-) im jeaulous for your etching skills

good to see a deadringer in here. build mine up but didnt box it because i have problems finishing my enclosure (couldnt find a white decalthat works, my enclosures too dark for using transparent foil)
Thanks, you just need to try etching. It ain't that hard :) Maybe you could try etched finish on yours too..

thought about that, but
is etching possible with a powdercoated enclosure?

brejna

Quote from: Cortexturizer on March 25, 2015, 10:40:52 AM
an absolute beast of a pedal dude. I sincerely hope that after an eleven hundred ODs more you'll find the one you like :D
Thanks :D
You wouldn't believe, but more of these are ready to box :D

Quote from: luks999 on March 25, 2015, 10:45:37 AM
Quote from: brejna on March 24, 2015, 07:52:18 PM
Quote from: luks999 on March 24, 2015, 06:54:39 PM
fantastic job :-) im jeaulous for your etching skills

good to see a deadringer in here. build mine up but didnt box it because i have problems finishing my enclosure (couldnt find a white decalthat works, my enclosures too dark for using transparent foil)
Thanks, you just need to try etching. It ain't that hard :) Maybe you could try etched finish on yours too..

thought about that, but
is etching possible with a powdercoated enclosure?

You need to take off paint, 'cause acid want work on paint...

micromegas

Did I miss this? how?
Awesome dude. Those 1uF wimas are beautiful :) and I love the etch.
'My favorite programming language is solder' - Bob Pease

Software Developer @ bela.io

miha

Looks neat for sure!
I'll probably build one and I'm wondering about the boost section; is it a clean boost or does it add lots of gain?

brejna

Quote from: micromegas on March 25, 2015, 05:51:49 PM
Did I miss this? how?
Awesome dude. Those 1uF wimas are beautiful :) and I love the etch.

Thanks, wimas are always nice have :)

Quote from: miha on March 25, 2015, 06:46:19 PM
Looks neat for sure!
I'll probably build one and I'm wondering about the boost section; is it a clean boost or does it add lots of gain?

Boost adds bit of dirt to it, just right amount in mine opinion :)
Cheers

nzCdog

dang! looks so impressive, excellent build brane!

brejna


micromegas

were you able to try this one with both IRF510 transistors finally?
'My favorite programming language is solder' - Bob Pease

Software Developer @ bela.io

brejna

Quote from: micromegas on April 01, 2015, 04:36:24 PM
were you able to try this one with both IRF510 transistors finally?

I ordered them today from musikding, hopefully I'll have them next week..

brejna

Quote from: micromegas on April 01, 2015, 04:36:24 PM
were you able to try this one with both IRF510 transistors finally?
I just changed that 2n7000 with IRF510 and it works great :D

JoeDorcia

The etch is great, looks awesome. Really versatile circuit, I may have to knock one of these up...
Making noise since 2001... If only I knew what I was doing

Instagram.com/Twitter - @JoeDorcia pictures and pretentious ramblings about my son, coffee, food, pedals and guitars...

brejna

Quote from: JoeDorcia on April 14, 2015, 08:01:49 PM
The etch is great, looks awesome. Really versatile circuit, I may have to knock one of these up...
Thanks man, you won't regret build this one :)