I think i would like to take a try at vero board building. Ive done a few PCB kits, and this would be my first wade into the deeper build end of things....
I found a circuit that I used to have (Menatone Blue Collar) and liked a lot.

This will be my first vero build, so please bear with me....
1. Where is a good place to buy vero and resistors and caps and IC's?
2. I think I understand the drilling (reverse the schematic and drill out the red squares), am I right?
3. For the links, the black bars are the steel wire, they get soldered at the blue dots. (on the front of the circuit)
4. For the pots, the 1.2.3 refer to the lugs on the pots (I assume) which one is 1 (I assume 2 is the middle one)?
5. I see one wire for input, which lug does that go to on the jack (will be using mono jacks)?
6. I see one wire for power (will be using DC power) this is the positive, right?
7. Where do I wire up the footswitch?
8. Where is the output?
Sorry to be Jimmy McQuestions here.... Much obliged, and thanks in advance.
//ad