Author Topic: UBER SWITCH v 1.1 probleme  (Read 290 times)

MOPO

  • Diode Destroyer
  • *
  • Posts: 4
    • View Profile
UBER SWITCH v 1.1 probleme
« on: February 10, 2017, 10:59:47 AM »
Hello,
I do not know if some of you are using the uber switch version 1.1, for my part, this is the first time and I have a problem that I can not solve.
The switch is on but the led does not light and the circuit is running and switched off normally.
The led is not involved because if I connect the ground to it works but the effect is no longer extinguished.
I checked and found no error compared to the doc, I wonder if the conduit is not in the wrong direction on the shemas.

If anyone could help me would be cool.

thank you

@ +

brejna

  • Electron Doctor
  • *****
  • Posts: 1176
  • Brane
    • View Profile
    • aestheticempathy
Re: UBER SWITCH v 1.1 probleme
« Reply #1 on: February 10, 2017, 12:33:42 PM »
Do you have damaged pad or trace around the LED?
« Last Edit: February 10, 2017, 12:35:23 PM by brejna »

MOPO

  • Diode Destroyer
  • *
  • Posts: 4
    • View Profile
Re: UBER SWITCH v 1.1 probleme
« Reply #2 on: February 10, 2017, 04:24:32 PM »
It may be a little heated with a shine that I scratch, but nothing dramatic in my opinion but it is a possibility why not ....... in this case there would be a link to the mass to Reinstate?
But the continuity between the - of the led and the resistance is ok as well as the continuity between the + of the led and the diode.

MOPO

  • Diode Destroyer
  • *
  • Posts: 4
    • View Profile
Re: UBER SWITCH v 1.1 probleme
« Reply #3 on: March 05, 2017, 10:31:35 AM »
Really no one will have an idea for this problem?

bluescage

  • Solder Ninja
  • ****
  • Posts: 241
  • Ad
    • View Profile
Re: UBER SWITCH v 1.1 probleme
« Reply #4 on: March 06, 2017, 08:31:42 AM »
The only thing I can think of is that the LED is placed the wrong way. The longer of the two leads (which is +) should go in the square pad and the shorter lead (which is -) should be in the round pad

MOPO

  • Diode Destroyer
  • *
  • Posts: 4
    • View Profile
Re: UBER SWITCH v 1.1 probleme
« Reply #5 on: March 06, 2017, 04:11:18 PM »
The led is connected as it should ......... but thank you anyway, it seems that this switch may not work with all the circuit .......