Author Topic: Help with breadboarding a Maestro FZ-1  (Read 538 times)

krisk

  • Diode Destroyer
  • *
  • Posts: 28
    • View Profile
Help with breadboarding a Maestro FZ-1
« on: February 14, 2017, 09:37:18 AM »
This is my first time trying to layout a breadboard for testing from a schematic and some vero board layouts. I used the diy layout creator to lay out all of my components. Thought I'd post it here see if anyone had some suggestions or see's any mistakes I might have made. Here's the schematic and layout I made.
 I also added a 2k trimpot in place of the 1k5 for biasing q2 which I've read is very useful. Thanks in advance everybody.