Author Topic: Tractor Beam update  (Read 670 times)

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 7524
  • Brian
    • View Profile
Tractor Beam update
« on: August 12, 2017, 06:15:01 PM »
Progress has been made on the Tractor Beam (phaser) and is on schedule for release probably in 7-10 days. I got the audio board populated after waiting on a couple parts from Mouser. The Tractor Beam was originally called the Enterprise and is built on the same board. There are a few value tweaks from the Enterprise so the pot values here are not all accurate.

This will be a difficult build, but if you have done one of the VFE already it shouldn't be too bad. There is on electro that has to be soldered in parallel with a Zener (top right). There are three resistor networks (two 10k and one 22k). It also requires four matched 2n5952 FETs. I actually had a set I previously matched for a different project and was no longer using. The doc will have instructions on how to match FETs (I think I may have already covered this in the Phase 90 doc). The "B10k" is actually 1k now, and only having 2k on-hand I soldered in another 2k resistor in parallel with it.

Also, I have a FET matching board I may just put up on OSH Park. It was supposed to be part of a small batch of utility boards I was going to offer for sale but I never got around to it.

Anyway, to do: build the switching board and test it out. My prototypes for the re-designs of the VFE switching board will be here in a few days so I think I will wait and test one of those out with this build.
I own madbeanpedals (duh). I am part owner of Function F(X).

Zigcat

  • Transistor Tickler
  • **
  • Posts: 86
  • Andrew S.
    • View Profile
Re: Tractor Beam update
« Reply #1 on: August 12, 2017, 06:45:19 PM »
Decent!

BrianS

  • Electron Doctor
  • *****
  • Posts: 599
    • View Profile
Re: Tractor Beam update
« Reply #2 on: August 13, 2017, 03:33:46 PM »
Brian,
Anyway you might beable to post the board page with all the parts like you did with the Choral Reef? If you can't it's no big deal. Thanks. 

lego4040

  • Stompbox Star
  • ***
  • Posts: 212
    • View Profile
Re: Tractor Beam update
« Reply #3 on: August 13, 2017, 06:04:12 PM »
awesome, will keep watch

Ralfg

  • Stompbox Star
  • ***
  • Posts: 160
  • Ralf
    • View Profile
Re: Tractor Beam update
« Reply #4 on: August 13, 2017, 07:49:28 PM »
What Function F(x) board is that in the background?

m-Kresol

  • Electron Doctor
  • *****
  • Posts: 2220
  • Felix - Graz, Austria
    • View Profile
    • My blog - in german
Re: Tractor Beam update
« Reply #5 on: August 14, 2017, 01:53:57 AM »
What Function F(x) board is that in the background?

should be the clusterfuzz.

that phaser layout is really closely packed...
I build pedals to hide my lousy playing.

my shared OSH park projects: https://oshpark.com/profiles/m-Kresol

dan.schumaker

  • Solder Ninja
  • ****
  • Posts: 397
  • Schu-Tone
    • View Profile
Re: Tractor Beam update
« Reply #6 on: August 14, 2017, 06:50:02 AM »
That looks really cool.  Never used resistor array's before.  Looks like a really smart way to save a lot of space on a really packed board.

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 7524
  • Brian
    • View Profile
Re: Tractor Beam update
« Reply #7 on: September 12, 2017, 08:50:01 AM »
Here is the draft of the Tractor Beam BOM/Shopping list. I have a bit of debugging to do on my build but I believe this list is accurate.

I own madbeanpedals (duh). I am part owner of Function F(X).

dan.schumaker

  • Solder Ninja
  • ****
  • Posts: 397
  • Schu-Tone
    • View Profile
Re: Tractor Beam update
« Reply #8 on: September 12, 2017, 08:52:34 AM »
As always, thanks Brian!

Hirti

  • Diode Destroyer
  • *
  • Posts: 27
    • View Profile
Re: Tractor Beam update
« Reply #9 on: September 12, 2017, 09:17:55 AM »
Thank you!

hasanova

  • Diode Destroyer
  • *
  • Posts: 3
    • View Profile
Re: Tractor Beam update
« Reply #10 on: September 13, 2017, 06:17:58 PM »
Cheers!

tcpoint

  • Stompbox Star
  • ***
  • Posts: 219
    • View Profile
Re: Tractor Beam update
« Reply #11 on: September 14, 2017, 04:44:43 PM »
The 1.43K resistor that you link to mouser is way too big.  It's a Vishay Dale that's the same size as a 1/2 watt Xicon.   I did a quick search but couldn't find anything suitable.  I'll probably get some smd resistors of that value and make them work.  After all, it's diy.
« Last Edit: September 14, 2017, 05:01:43 PM by tcpoint »

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 7524
  • Brian
    • View Profile
Re: Tractor Beam update
« Reply #12 on: September 14, 2017, 05:46:39 PM »
Huh - 8mm. That is a bit long (though they could be made standing). Here are two 6mm ones (still a bit long):

http://www.mouser.com/ProductDetail/Vishay-Dale/RN55D1431FRE6/?qs=sGAEpiMZZMu61qfTUdNhGzQiLrTi4xBWc4N7jZ0yHC0%3d
http://www.mouser.com/ProductDetail/Vishay-Dale/RN55D1431FB14/?qs=sGAEpiMZZMu61qfTUdNhG3gu04FpCMicro03p17NpK8%3d

Thanks for posting that. I forget which one I used...I'll have to look.
I own madbeanpedals (duh). I am part owner of Function F(X).