Author Topic: Anyone built a vero PLL?  (Read 870 times)

soldersqueeze

  • Solder Ninja
  • ****
  • Posts: 261
    • View Profile
Anyone built a vero PLL?
« on: August 20, 2017, 11:51:54 AM »
Hey eveyone, this is my first post since 2013, meaning i've been out of the pedal game for 4ish years  :o I've realised i really miss it and want to start putting in the time again!
Feeling an urge to prove something to myself, i'm going to attempt  a PLLone, as i've always wanted to try one out. I know it might be wiser to start with a fuzzface or something, but so far it's going OK-


What I'm wondering is if anyone here has done this, and if they have any photos or advice. The great Photobucket nightmare has hindered my research somewhat  >:(

Anywhoo, it's nice to be back and I hope to be here often. Now I'm off to drool at the build reports section some more! Best wishes to you all

stringsthings

  • Electron Doctor
  • *****
  • Posts: 587
    • View Profile
Re: Anyone built a vero PLL?
« Reply #1 on: August 20, 2017, 09:15:55 PM »
Ambitious! Go for it!

I'd check out the thread on DIYSB by digit2. it's in the members section.
Even though the pics aren't there anymore, you can check out the section in the gallery ... it's got all the docs for his vero build.

PMowdes2

  • Diode Destroyer
  • *
  • Posts: 30
    • View Profile
Re: Anyone built a vero PLL?
« Reply #2 on: August 21, 2017, 03:09:34 AM »

I'm working on a pcb with Dino (digi2t) at the moment, i'll keep you posted.

soldersqueeze

  • Solder Ninja
  • ****
  • Posts: 261
    • View Profile
Re: Anyone built a vero PLL?
« Reply #3 on: August 21, 2017, 08:57:13 AM »
Ambitious! Go for it!

I'd check out the thread on DIYSB by digit2. it's in the members section.
Even though the pics aren't there anymore, you can check out the section in the gallery ... it's got all the docs for his vero build.

Thanks for the heads-up, looks like i have some reading to do!


I'm working on a pcb with Dino (digi2t) at the moment, i'll keep you posted.

Colour me interested- would deffo pick one up when available!

stringsthings

  • Electron Doctor
  • *****
  • Posts: 587
    • View Profile
Re: Anyone built a vero PLL?
« Reply #4 on: August 21, 2017, 08:31:24 PM »

I'm working on a pcb with Dino (digi2t) at the moment, i'll keep you posted.

Cool!  me want also!  :)

Matmosphere

  • Electron Doctor
  • *****
  • Posts: 1075
  • Matthew
    • View Profile
Re: Anyone built a vero PLL?
« Reply #5 on: August 23, 2017, 09:30:19 PM »
This just popped up in my email.

https://www.earthquakerdevices.com/data-corrupter

shedland

  • Diode Destroyer
  • *
  • Posts: 38
    • View Profile
Re: Anyone built a vero PLL?
« Reply #6 on: August 23, 2017, 10:25:01 PM »
+1 for one of Dino's (digits) boards

vizcities

  • Transistor Tickler
  • **
  • Posts: 57
    • View Profile
Re: Anyone built a vero PLL?
« Reply #7 on: August 23, 2017, 10:54:01 PM »
Also in for a Dino board when it's available.

alanp

  • Electron Doctor
  • *****
  • Posts: 4267
    • View Profile
Re: Anyone built a vero PLL?
« Reply #8 on: August 24, 2017, 12:25:36 AM »
A blue dino schumann PLL board has been in my box of fail for quite awhile, something's sick with the input opamp.
"Hot water, good dentishtry and shoft lavatory paper."
- Cohen the Barbarian, on what is greatest in life
My OSHpark shared projects

PMowdes2

  • Diode Destroyer
  • *
  • Posts: 30
    • View Profile
Re: Anyone built a vero PLL?
« Reply #9 on: August 24, 2017, 03:22:27 AM »

This will be a new pcb design with board mounted components, I'm keen to avoid too much off board wiring.

Andlord

  • Diode Destroyer
  • *
  • Posts: 49
    • View Profile
Re: Anyone built a vero PLL?
« Reply #10 on: August 27, 2017, 03:17:01 PM »
Also in for a Dino board when it's available.

+1 for me please

PMowdes2

  • Diode Destroyer
  • *
  • Posts: 30
    • View Profile
Re: Anyone built a vero PLL?
« Reply #11 on: August 31, 2017, 03:13:03 AM »
Also in for a Dino board when it's available.

+1 for me please
Nearly done with the PCB design


Sent from my F5321 using Tapatalk


Mikro93

  • Diode Destroyer
  • *
  • Posts: 17
    • View Profile
Re: Anyone built a vero PLL?
« Reply #12 on: August 31, 2017, 03:45:45 AM »
 :o :o :o

Nice!

That looks actually a lot more like Ftelletronica's take on the PLL than the original one... So, including the drone part, which is amazing, but with even more stuff...

What are the pushbuttons for? or maybe is it just to mark the positionning of the pots?
« Last Edit: August 31, 2017, 05:03:58 AM by Mikro93 »

bsoncini

  • Stompbox Star
  • ***
  • Posts: 171
    • View Profile
Re: Anyone built a vero PLL?
« Reply #13 on: August 31, 2017, 12:12:22 PM »
That looks nuts. Is there more pots/switches than resistors/capacitors on that PCB?

PMowdes2

  • Diode Destroyer
  • *
  • Posts: 30
    • View Profile
Re: Anyone built a vero PLL?
« Reply #14 on: August 31, 2017, 12:18:43 PM »
:o :o :o

Nice!

That looks actually a lot more like Ftelletronica's take on the PLL than the original one... So, including the drone part, which is amazing, but with even more stuff...

What are the pushbuttons for? or maybe is it just to mark the positionning of the pots?
No push buttons, they are 9mm pots.

It includes the drone and momentary footswitches on board, the only external input is for an areppegiator.

Sent from my F5321 using Tapatalk