Author Topic: need help anyone plz re muton biphase  (Read 417 times)

samgalbraith

  • Diode Destroyer
  • *
  • Posts: 1
    • View Profile
need help anyone plz re muton biphase
« on: January 21, 2018, 02:35:04 AM »
I'm new here and I'm just starting builds
I got told I can get mutron biphase pcb's here
can someone help me plz

somnif

  • Electron Doctor
  • *****
  • Posts: 1017
    • View Profile
Re: need help anyone plz re muton biphase
« Reply #1 on: January 21, 2018, 02:46:50 AM »
I don't know of any bi-phase pcbs off the top of my head. I know a fellow made a 1590B sized mu-tron II, and was working on a trick to shove 2 in a box, but dunno how far he got.

Closest I know is the folks behind Dead End FX talked about a board a while back, but its not on their website, so no idea.

alanp

  • Electron Doctor
  • *****
  • Posts: 4691
    • View Profile
Re: need help anyone plz re muton biphase
« Reply #2 on: January 21, 2018, 03:23:34 AM »
Brian did an etch project for HALF of a Biphase.
"Hot water, good dentishtry and shoft lavatory paper."
- Cohen the Barbarian, on what is greatest in life
My OSHpark shared projects
My website

PMowdes2

  • Transistor Tickler
  • **
  • Posts: 80
  • DeadEndFX
    • View Profile
Re: need help anyone plz re muton biphase
« Reply #3 on: January 21, 2018, 03:35:01 AM »
I built a prototype before Dino and I started Deadend FX, it worked but there were some niggles I wanted to iron out.  I've started work on a design with board mounted controls but we've been so busy that I've only managed to design the controls board.   Hopefully it won't be too much longer.

Sent from my F5321 using Tapatalk

DeadEndFX

PMowdes2

  • Transistor Tickler
  • **
  • Posts: 80
  • DeadEndFX
    • View Profile
Re: need help anyone plz re muton biphase
« Reply #4 on: January 21, 2018, 03:37:15 AM »
I built a prototype before Dino and I started Deadend FX, it worked but there were some niggles I wanted to iron out.  I've started work on a design with board mounted controls but we've been so busy that I've only managed to design the controls board.   Hopefully it won't be too much longer.

Sent from my F5321 using Tapatalk
Mutronics are releasing a new version of it at NAMM by the way

Sent from my F5321 using Tapatalk

DeadEndFX