News:

Forum may be experiencing issues.

Main Menu

Mobius Strip (Patreon build)

Started by Netnnk, April 03, 2018, 06:23:53 PM

Previous topic - Next topic

Netnnk

      Here's my Mobius Strip build from the Patreon, same as the one on the main page. I'll be using a 1590BB enclosure, so the pots and jacks are off board. 
      The build went smoothly, but I suggest box film caps for 82n and above.   You can get away with 1/4W resistors, but go for the 1/8W if you can, especially for the ones under the PT2399's.  Like the PDF advises, I had to use rows of in-line sockets, as a 16 pin socket won't fit. 

fair.child

You're posting this on purpose. I see what you did! 8)