Author Topic: 4 vfe fuzzes: Fiery, 5:00, Cocktail, Wooly  (Read 879 times)

Netnnk

  • Transistor Tickler
  • **
  • Posts: 51
    • View Profile
4 vfe fuzzes: Fiery, 5:00, Cocktail, Wooly
« on: April 12, 2018, 09:06:06 AM »
Using Patreon Eagle files, which are now available directly from them. I'll be using 1590BB enclosures,
so much of my wiring is offboard. All four are built and working well.

Fiery Red Horse – very high gain Big Muff with charge pump offering voltage cut and boost. It has a
clipping pot and bass/treble Baxandall eq.  It's my favorite BMP variant so far for sludgy metal palm
muting – plenty of gain.


5:00 Fuzz – more traditional Big Muff with voltage starve, clipping switch on both stages and midrange
flat/boost/cut switch. It can go from very smooth, to sputtery


Fuzz Cocktail – modded Fender Blender octave fuzz with more tone and clipping controls.  Unlike the
original, this one has no trouble  reaching unity volume


Wooly Bear – modded Foxx Tone Machine octave fuzz. It has a lot more low end than the original and
cleaner signal can be blended in. The octave is a blend pot, instead of an on/off switch.


Although I used germanium diodes throughout, they suggest schottky diodes as suitable replacements. The
Fiery Red Horse was from Osh Park, and the other 3 pcb's were from Elecrow.

somnif

  • Electron Doctor
  • *****
  • Posts: 1452
    • View Profile
Re: 4 vfe fuzzes: Fiery, 5:00, Cocktail, Wooly
« Reply #1 on: April 12, 2018, 07:25:57 PM »
I've been thinking of making a wooly bear. Very first pedal I ever owned was a crappy Danelectro Foxx-clone, and even with nostalgia goggles firmly in place my memories of it aren't spectacular. The circuit itself, however, has merit and I've been wanting one for a while, but never got around to it.

JackSkellington

  • Solder Ninja
  • ****
  • Posts: 260
    • View Profile
Re: 4 vfe fuzzes: Fiery, 5:00, Cocktail, Wooly
« Reply #2 on: April 13, 2018, 02:33:27 AM »
I would like to have an idea to know something more about the Fiery Red Horse, it includes interesting features.
Is there any chance to know the schematic. :P
«Just because I cannot see it doesn't mean I can't believe it»

somnif

  • Electron Doctor
  • *****
  • Posts: 1452
    • View Profile
Re: 4 vfe fuzzes: Fiery, 5:00, Cocktail, Wooly
« Reply #3 on: April 13, 2018, 02:53:48 AM »
I would like to have an idea to know something more about the Fiery Red Horse, it includes interesting features.
Is there any chance to know the schematic. :P

Its roughly based around a Triangle-era-ish Big Muff, with a power-feed knob (adjust the voltage seen by the middle two gain stages), a baxandall tone section, and the ability to fade between silicon and germanium clipping diodes.  There is a schematic, but since its something Peter is selling I don't feel comfortable just posting it here (Its also mostly unlabelled which is admittedly a little annoying) .

JackSkellington

  • Solder Ninja
  • ****
  • Posts: 260
    • View Profile
Re: 4 vfe fuzzes: Fiery, 5:00, Cocktail, Wooly
« Reply #4 on: April 13, 2018, 09:03:17 AM »
 :-[ Ok, I got it.

Thank you, anyway. At least these informations will only keep my curiosity at bay. :P
«Just because I cannot see it doesn't mean I can't believe it»

fair.child

  • Electron Doctor
  • *****
  • Posts: 640
    • View Profile
Re: 4 vfe fuzzes: Fiery, 5:00, Cocktail, Wooly
« Reply #5 on: April 20, 2018, 07:38:38 PM »
For the Fiery Red Horse, it seems you didn't add 4x 1n34a instead you just put 2x 1n34a. I wonder this will impact the dynamic of the clipping itself.