Author Topic: Please don´t tell Disney®  (Read 613 times)

verr76

  • Transistor Tickler
  • **
  • Posts: 54
    • View Profile
Re: Please don´t tell Disney®
« Reply #15 on: May 07, 2018, 09:27:20 AM »
Thanks for the instructions! ;)

You just learnt to me an import thing I still didn't get.:P
The two EQs should be a simple tonestack, and I guess, a Marshall style could be more appropriate. I see that trimpot, it is the Tone control, probably.

To recover the volume loss you advice to play with R12 - 22k, that should be control the gain of the last op amp stage.
But, could we try to decrease R11 - 47k? Or is right this the thing you advice not to do?
Yes. That works to. If you do a quick search for the schematic you'll see it sometimes at lower values.
Mine's at 4k7 actually.
And yes, the trimpot is the original tone control. You can leave a resistor for that to.
« Last Edit: May 07, 2018, 09:32:35 AM by verr76 »
Note to self: Fingers are not heat sinks!

studiodunn

  • Stompbox Star
  • ***
  • Posts: 205
    • View Profile
Re: Please don´t tell Disney®
« Reply #16 on: May 16, 2018, 04:08:29 PM »
Amazing build!