Author Topic: Okko Dominator switch  (Read 228 times)

drog_trog

  • Transistor Tickler
  • **
  • Posts: 118
    • View Profile
Okko Dominator switch
« on: June 25, 2018, 07:23:04 AM »
Is it a SPDT on-off-on or SPDT on-on-on thats used in this, here is a schematic i found and also the dominatrix to compare




zombiesonore

  • Stompbox Star
  • ***
  • Posts: 147
    • View Profile
Re: Okko Dominator switch
« Reply #1 on: June 25, 2018, 12:02:40 PM »
After reading the thread at FST, I see an on/off/on SPDT...
Also, you can use a 1M pot for a full range selection.

drog_trog

  • Transistor Tickler
  • **
  • Posts: 118
    • View Profile
Re: Okko Dominator switch
« Reply #2 on: June 25, 2018, 01:25:26 PM »
thanks, I'm putting it in a 125B with top mounted jacks of course

tcpoint

  • Solder Ninja
  • ****
  • Posts: 260
    • View Profile
Re: Okko Dominator switch
« Reply #3 on: June 26, 2018, 08:07:00 PM »
It's a monster pedal.  I love it.

juansolo

  • Electron Doctor
  • *****
  • Posts: 4498
  • John - Wakefield, UK
    • View Profile
    • Juan's Gnomepage
Re: Okko Dominator switch
« Reply #4 on: July 04, 2018, 02:18:26 PM »
On the dominatrix derivative in the 2nd schematic, on-off-on.
JuansoloFX Stompage - DIY effects library & stuff
(NOT commercial)

“I excite very large doom for days” - playpunk

drog_trog

  • Transistor Tickler
  • **
  • Posts: 118
    • View Profile
Re: Okko Dominator switch
« Reply #5 on: July 05, 2018, 09:47:46 AM »
Thanks

blearyeyes

  • Electron Doctor
  • *****
  • Posts: 1641
  • Like so many others, my name is Dan.
    • View Profile
Re: Okko Dominator switch
« Reply #6 on: July 07, 2018, 10:31:07 AM »
If anyone reads this:
I have a question regarding schematics. If the switch is on-off-on and in the middle position no circuit is closed why does the schematic show ground?
I sometimes build pedals as "Dan"
I built peddles for Bat Thumb’s car.