Author Topic: NoNameFlange. Finally!  (Read 1310 times)

PMowdes2

  • Transistor Tickler
  • **
  • Posts: 93
  • DeadEndFX
    • View Profile
Re: NoNameFlange. Finally!
« Reply #15 on: July 09, 2018, 03:46:27 AM »

Looking good Juan.
DeadEndFX

gordo

  • Electron Doctor
  • *****
  • Posts: 1729
    • View Profile
    • Project Website
Re: NoNameFlange. Finally!
« Reply #16 on: July 09, 2018, 05:33:40 AM »
I've got the single sided, Keefe etched, version that I really need to man-up and finish.  I've become very spoiled/lazy with board mounted pots and switches and this has neither....

PMowdes2

  • Transistor Tickler
  • **
  • Posts: 93
  • DeadEndFX
    • View Profile
Re: NoNameFlange. Finally!
« Reply #17 on: July 09, 2018, 08:42:33 AM »
I just placed an order for these, gonna be a long wait for them to be fab'd



DeadEndFX

midwayfair

  • Electron Doctor
  • *****
  • Posts: 6914
  • Jon P
    • View Profile
    • Midway Fair
Re: NoNameFlange. Finally!
« Reply #18 on: July 09, 2018, 09:36:21 AM »
I was more interested in it working properly inside than making it pretty...

A true AlanP project, then.

I keed, I keed.
Myself's music & things I make: http://jonpattonmusic.com. My band: http://midwayfair.org. PCBs of my designs from: http://www.1776Effects.com (Bearhug Comp & Cardinal Harmonic Trem); http://www.jmkpcbs.com (Hamlet+ delay & Blue Warbler envelope vibe); Snow Day OD/Flabulanche: www.madbeanpedals.com

selfdestroyer

  • skilled electronics ninja master
  • Electron Doctor
  • *****
  • Posts: 4673
  • Cody - Fresno CA USA
    • View Profile
    • My Blog
Re: NoNameFlange. Finally!
« Reply #19 on: July 09, 2018, 10:06:29 AM »
Came out great John.. but, it reminds me I have one populated that needs boxing.. ugh..

I need to get off my ass and start building again. lol

Cody

diablochris6

  • Electron Doctor
  • *****
  • Posts: 823
    • View Profile
Re: NoNameFlange. Finally!
« Reply #20 on: July 09, 2018, 01:01:12 PM »
Looks great. I really enjoy mine but never got around to decorating or labelling the enclosure so I don't always remember what all the knobs do!
Build guides of my original designs and modifications here

juansolo

  • Electron Doctor
  • *****
  • Posts: 4551
  • John - Wakefield, UK
    • View Profile
    • Juan's Gnomepage
Re: NoNameFlange. Finally!
« Reply #21 on: July 09, 2018, 03:09:37 PM »
Came out great John.. but, it reminds me I have one populated that needs boxing.. ugh..

I need to get off my ass and start building again. lol

Cody

These last few builds have been in the works for months, if not years! It's not good...
JuansoloFX Stompage - DIY effects library & stuff
(NOT commercial)

“I excite very large doom for days” - playpunk

LaceSensor

  • Electron Doctor
  • *****
  • Posts: 2865
  • Lovetone 4 Ever
    • View Profile
    • How Not To Make A Pedal
Re: NoNameFlange. Finally!
« Reply #22 on: July 10, 2018, 02:51:47 AM »
I just placed an order for these, gonna be a long wait for them to be fab'd





Pretty mental looking board. Kudos.

danielzink

  • Diode Destroyer
  • *
  • Posts: 44
    • View Profile
Re: NoNameFlange. Finally!
« Reply #23 on: July 10, 2018, 10:33:47 AM »
sub'd

 8)

Govmnt_Lacky

  • Electron Doctor
  • *****
  • Posts: 1895
  • Dinner at Dorsia? No problem...
    • View Profile
Re: NoNameFlange. Finally!
« Reply #24 on: July 10, 2018, 02:21:52 PM »
Hey John.

Epic build but I must ask... How is the Time Out jack working out for you? Every build that I have done demanded that the Sleeve of the Time Out jack had to be connected to the ground bar on the other jacks. If I just wired it like the schematic (and like you have it in your pic), I would always get a horrible oscillation from the Time Out. Of course, this was only in stereo mode as the Space Out/Mono jack combines the two effects.

Have you seen this with your build as well?

juansolo

  • Electron Doctor
  • *****
  • Posts: 4551
  • John - Wakefield, UK
    • View Profile
    • Juan's Gnomepage
Re: NoNameFlange. Finally!
« Reply #25 on: July 11, 2018, 02:37:23 AM »
The switched sleeve is connected to the common ground when it's not got a plug in there. When there is, it has it's own ground, the yellow wire on mine (I think using the transformer for isolation, guessing though, I'd have to look at the schematic). But if you read the manual to the original FWNN, there can be all sorts of problems with the general oddness of the whole thing with different setups. All I can say is that with what we tried it with, an MJW (Marshall 18W-a-like) and a Ampeg (Fender brownface deluxe I think...?) it was ok and behaved how we thought it should.
JuansoloFX Stompage - DIY effects library & stuff
(NOT commercial)

“I excite very large doom for days” - playpunk

Govmnt_Lacky

  • Electron Doctor
  • *****
  • Posts: 1895
  • Dinner at Dorsia? No problem...
    • View Profile
Re: NoNameFlange. Finally!
« Reply #26 on: July 11, 2018, 01:51:15 PM »
The switched sleeve is connected to the common ground when it's not got a plug in there. When there is, it has it's own ground, the yellow wire on mine (I think using the transformer for isolation, guessing though, I'd have to look at the schematic). But if you read the manual to the original FWNN, there can be all sorts of problems with the general oddness of the whole thing with different setups. All I can say is that with what we tried it with, an MJW (Marshall 18W-a-like) and a Ampeg (Fender brownface deluxe I think...?) it was ok and behaved how we thought it should.

I just remember building mine and using them in stereo to 2 different amps and I would only get squeel out of the Time Out jack. I tried everything I could think of (swap amps, different instruments, different outlets for each amp, power conditioners, etc.) and with every build I would get the squeel from Time Out. Only thing that would get rid of it was to ground the Time Out jack Sleeve (along with it's respective wire.

Torgoslayer

  • Solder Ninja
  • ****
  • Posts: 417
    • View Profile
Re: NoNameFlange. Finally!
« Reply #27 on: July 11, 2018, 02:37:10 PM »
I just placed an order for these, gonna be a long wait for them to be fab'd




Nice!! I'm in!

juansolo

  • Electron Doctor
  • *****
  • Posts: 4551
  • John - Wakefield, UK
    • View Profile
    • Juan's Gnomepage
Re: NoNameFlange. Finally!
« Reply #28 on: July 22, 2018, 08:03:47 AM »
Wasn't happy with the decal so stripped it and re-decaled it. That wasn't fun, but much happier with it now.

JuansoloFX Stompage - DIY effects library & stuff
(NOT commercial)

“I excite very large doom for days” - playpunk

stringsthings

  • Electron Doctor
  • *****
  • Posts: 1165
    • View Profile
Re: NoNameFlange. Finally!
« Reply #29 on: July 23, 2018, 11:09:15 PM »
Wasn't happy with the decal so stripped it and re-decaled it. That wasn't fun, but much happier with it now.

That looks real nice!

Those "?"s remind me of the riddler.
All You Need Is Love