Author Topic: Sept Release schedule  (Read 1702 times)

Yahoo67

  • Transistor Tickler
  • **
  • Posts: 108
    • View Profile
Re: Sept Release schedule
« Reply #30 on: September 12, 2018, 05:55:09 AM »
 ??? A ROG peppermill maybe ^^ ohhhh and a 100 posts for me !

Matmosphere

  • Electron Doctor
  • *****
  • Posts: 1440
  • Matthew
    • View Profile
Re: Sept Release schedule
« Reply #31 on: September 12, 2018, 06:10:18 AM »
Havenít seen one of those in a couple years.

EBK

  • Electron Doctor
  • *****
  • Posts: 671
  • Eric K.
    • View Profile
Re: Sept Release schedule
« Reply #32 on: September 12, 2018, 06:35:44 AM »
Some giveaway board ideas:
A clean blend (I previously suggested that),
a simple tremolo,
a Si fuzz face,
a sine wave generator,
a headphone amp,
an LED pulser or color cycler (perhaps even a color organ),
a VU meter,
a crossfader,
a panel of multiple SOT-23 (or other SMD) adapters,
a turducken.
« Last Edit: September 12, 2018, 06:41:23 AM by EBK »
Not affiliated with Oatey, makers of the world's best and most delicious* low tar solder paste. Ask for Oatey -- It's the juiciest!
*Solder paste is not food.

zgrav

  • Transistor Tickler
  • **
  • Posts: 70
    • View Profile
Re: Sept Release schedule
« Reply #33 on: September 12, 2018, 08:37:58 AM »
The graphic makes me think of spray paint, bug spray, or maybe an LEO carrying a baton with a handle.


oip

  • Stompbox Star
  • ***
  • Posts: 175
    • View Profile
Re: Sept Release schedule
« Reply #34 on: September 12, 2018, 05:35:54 PM »
will place order for chance of turducken

EBK

  • Electron Doctor
  • *****
  • Posts: 671
  • Eric K.
    • View Profile
Re: Sept Release schedule
« Reply #35 on: September 12, 2018, 06:12:08 PM »
will place order for chance of turducken
Glad someone noticed that.   ;D
I have full faith that Brian can make something from that suggestion.  I actually searched Google and discovered that no one has made a turducken circuit, so who knows what it could become!   8)
Not affiliated with Oatey, makers of the world's best and most delicious* low tar solder paste. Ask for Oatey -- It's the juiciest!
*Solder paste is not food.

Aentons

  • Stompbox Star
  • ***
  • Posts: 146
    • View Profile
Re: Sept Release schedule
« Reply #36 on: September 12, 2018, 06:50:23 PM »
I second that clean blender

Aentons

  • Stompbox Star
  • ***
  • Posts: 146
    • View Profile
Re: Sept Release schedule
« Reply #37 on: September 12, 2018, 07:00:02 PM »
I have also found these are uncommon but very useful.

Aleph Null

  • Solder Ninja
  • ****
  • Posts: 334
    • View Profile
    • The Hard Problem
Re: Sept Release schedule
« Reply #38 on: September 12, 2018, 07:50:42 PM »
I have also found these are uncommon but very useful.
Are those passive or active? If you put the two of them together and set the knee frequency right, you have a primitive cabinet simulator!

Aentons

  • Stompbox Star
  • ***
  • Posts: 146
    • View Profile
Re: Sept Release schedule
« Reply #39 on: September 12, 2018, 08:46:53 PM »
They are active two pole

sonnyboy27

  • Solder Ninja
  • ****
  • Posts: 249
  • Stephen
    • View Profile
    • Prentiss Effects DIY Blog
Re: Sept Release schedule
« Reply #40 on: September 13, 2018, 07:50:24 AM »
I have also found these are uncommon but very useful.

That sounds really useful. Do you have a schematic for those by chance?

Aentons

  • Stompbox Star
  • ***
  • Posts: 146
    • View Profile
Re: Sept Release schedule
« Reply #41 on: September 13, 2018, 09:04:06 AM »
Sorry, I don't have a schematic.

I believe Peter at VFE is doing something very similar with the Standout, Pinball, and Dragon. They have the hpf and lpf controls with the added bonus of a switch that selects between one or two poles which looks like it's just disconnecting one side of a dual gang pot.

The RUP and Klein Bottle also have these controls, but they work more as a crossover for multiband separation which is how I tend to use those Broughtons, with a Boss LS2 in mix mode, one in each loop.

« Last Edit: September 13, 2018, 09:14:17 AM by Aentons »

Leevibe

  • Electron Doctor
  • *****
  • Posts: 2294
  • Lee
    • View Profile
Re: Sept Release schedule
« Reply #42 on: September 13, 2018, 11:49:40 AM »
If that graphic means what I think it means, Iíll have to see if I still have he transistors and can remember how the pinouts go.

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 8406
  • Brian
    • View Profile
    • madbeanpedals
Re: Sept Release schedule
« Reply #43 on: September 14, 2018, 08:07:37 AM »
Big box of stickers has arrived. These will be included in every order until I run out. They should last until around Spring of 2019, haha.

There's a pic of one on my Facebook page.
I own madbeanpedals (duh). I am part owner of Function F(X).

jimilee

  • Electron Doctor
  • *****
  • Posts: 6954
  • Jimi Lee
    • View Profile
Re: Sept Release schedule
« Reply #44 on: September 14, 2018, 09:52:45 AM »
Ooh, I donít recall you saying that there will be stickers! Will there be bacon also?


Sent from my iPhone using Tapatalk
Pedal building is like the opposite of sex.  All the fun stuff happens before you get in the box.