Author Topic: Oct. Releases (instead of Sept)  (Read 1488 times)

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 8464
  • Brian
    • View Profile
    • madbeanpedals
Oct. Releases (instead of Sept)
« on: September 28, 2018, 07:08:43 PM »
The Sept. releases are being pushed to about Oct. 5th. Two reasons: I need a bit more time to complete the documentation and get the (approx. 100) FV-1 EEPROMs programmed, and also I am waiting to receive my box from PPP to verify the drilling template for the Dreamtime Delay (which will be available to order through them).

Here's what will be dropping:
1590A Pepper Spray (Percolator) giveaway starting Oct. 5th! I got more of these than I did the Donut so they should last a bit longer.
Dreamtime Delay (1590A FV-1 project w/EEPROM included)
Headtrip (1590B FV-1 project w/EEPROM included)
Waveloard TAPLFO3 project (very limited quantity to start but more in Nov).
9mm Alpha Pot Panel (also very limited quantity - 36 mini PCBs for wiring those pesky 9mm pots).
Free 10th Anniversary sticker has already been shipping with every order for the last 2 weeks and will continue for the rest of the year and into 2019 (the real 10th anniversary).

I also plan to build up a few Dreamtime pedals for sale just to say I did. Here is a preview of the finished box (this is just test UV printing). Not sure how I will market these (if at all) but I hope to do about a dozen by the end of the year. Note: this artwork is not available through PPP - only the pre-drilled 1590A box!




I own madbeanpedals (duh). I am part owner of Function F(X).

zgrav

  • Transistor Tickler
  • **
  • Posts: 76
    • View Profile
Re: Oct. Releases (instead of Sept)
« Reply #1 on: September 28, 2018, 07:35:52 PM »
The Dreamtime box looks nice.  I am intrigued at hearing a demo of the Headtrip.  The Dreamtime demo holds up well for repeated listens.

Aentons

  • Stompbox Star
  • ***
  • Posts: 162
    • View Profile
Re: Oct. Releases (instead of Sept)
« Reply #2 on: September 28, 2018, 07:59:30 PM »
Right on... Any idea yet on pricing for the fv-1 projects?

cooder

  • Electron Doctor
  • *****
  • Posts: 1821
  • Stephan Nelson / New Zealand / Aotearoa
    • View Profile
Re: Oct. Releases (instead of Sept)
« Reply #3 on: September 28, 2018, 08:13:12 PM »
Excellent! Also curious about the price for FV-1 projects... small amount of loose change dangling in paypal pocket...  :-\
BigNoise Amplification

jimilee

  • Electron Doctor
  • *****
  • Posts: 6999
  • Jimi Lee
    • View Profile
Re: Oct. Releases (instead of Sept)
« Reply #4 on: September 28, 2018, 08:34:42 PM »
Love me some delay


Sent from my iPhone using Tapatalk
Pedal building is like the opposite of sex.  All the fun stuff happens before you get in the box.

Willybomb

  • Electron Doctor
  • *****
  • Posts: 1150
    • View Profile
    • RockStarGuitar
Re: Oct. Releases (instead of Sept)
« Reply #5 on: October 01, 2018, 05:17:08 AM »
Will it be possible to swap the eeprom out of the Dreamtime and make it, say, a reverb?  I get that it's a single effect deal...

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 8464
  • Brian
    • View Profile
    • madbeanpedals
Re: Oct. Releases (instead of Sept)
« Reply #6 on: October 02, 2018, 04:05:56 AM »
Will it be possible to swap the eeprom out of the Dreamtime and make it, say, a reverb?  I get that it's a single effect deal...

The Dreamtime has a reverb in it, actually. The switch selects between the delay and internal FV-1 modulated reverb. You can also use a low profile socket if you want to swap the EEPROM out. You can even program a new EEPROM in circuit. All this will be explained and illustrated in the doc.
I own madbeanpedals (duh). I am part owner of Function F(X).

Willybomb

  • Electron Doctor
  • *****
  • Posts: 1150
    • View Profile
    • RockStarGuitar
Re: Oct. Releases (instead of Sept)
« Reply #7 on: October 02, 2018, 04:23:50 AM »
Sweet.  So it would reference to program 0 on the FV-1?  I'm looking forward to reading the doc.
« Last Edit: October 02, 2018, 04:44:17 AM by Willybomb »

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 8464
  • Brian
    • View Profile
    • madbeanpedals
Re: Oct. Releases (instead of Sept)
« Reply #8 on: October 05, 2018, 07:25:57 PM »
Sweet.  So it would reference to program 0 on the FV-1?  I'm looking forward to reading the doc.

Yes, the default program is 0 when the "reverb" switch is toggled.

Just a note I'm pushing this back again to a tentative date of the 10th. Sorry for the extra delay. It's taking me much longer to finish everything than I anticipated. But, I will start uploading project docs as I complete them before the the release date (I hope). This is a pretty big release with some detailed documentation. Not to mention that these are challenging builds.
I own madbeanpedals (duh). I am part owner of Function F(X).

nzCdog

  • Electron Doctor
  • *****
  • Posts: 3665
  • Corey - Christchurch, NZ
    • View Profile
    • Soundcloud
Re: Oct. Releases (instead of Sept)
« Reply #9 on: October 10, 2018, 01:08:39 PM »
Excite!

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 8464
  • Brian
    • View Profile
    • madbeanpedals
Re: Oct. Releases (instead of Sept)
« Reply #10 on: October 11, 2018, 08:33:02 AM »
Still behind but coming as soon as I can finish up.

I own madbeanpedals (duh). I am part owner of Function F(X).

zgrav

  • Transistor Tickler
  • **
  • Posts: 76
    • View Profile
Re: Oct. Releases (instead of Sept)
« Reply #11 on: October 11, 2018, 08:36:27 AM »
cool boxes for Wavelord and Headtrip.

TeleCrunch

  • Diode Destroyer
  • *
  • Posts: 19
    • View Profile
Re: Oct. Releases (instead of Sept)
« Reply #12 on: October 11, 2018, 08:46:14 AM »
N-i-i-i-ce. All three of these boxes are really tasteful. The fine detail in the paisley design (Headtrip) is amazing.

jjjimi84

  • Transistor Tickler
  • **
  • Posts: 70
    • View Profile
Re: Oct. Releases (instead of Sept)
« Reply #13 on: October 11, 2018, 10:39:49 AM »
Those look amazing!

oip

  • Stompbox Star
  • ***
  • Posts: 179
    • View Profile
Re: Oct. Releases (instead of Sept)
« Reply #14 on: October 11, 2018, 06:35:53 PM »
those faceplates!