Author Topic: Leviathan help wiring  (Read 323 times)

eduardo_gj1

  • Diode Destroyer
  • *
  • Posts: 2
    • View Profile
Leviathan help wiring
« on: March 13, 2019, 11:51:27 PM »
Hello, I am new here, I would like to start by greeting all the diy colleagues and administrators of this page.

I have a problem, I did the leviathan pbc but now I have problems to connect the footswitch, I have no idea what the mod, G and P of the pcb are for and something else, the wiring diagram of the footswitch is normal so truebypass

lrgaraujo

  • Transistor Tickler
  • **
  • Posts: 76
  • Lourenšo - Brasil
    • View Profile
Re: Leviathan help wiring
« Reply #1 on: March 14, 2019, 06:43:51 AM »
Hi! Welcome to the (probably) greatest forum out there!

G pads are usually extra ground pads Brian includes in his board designs.
The mod pad is there in case you want to include a modulation board (if you're building the Leviathan without modulation, you can leave it unconnected)
I couldn't find the P pad you mentioned

To connect the footswitch, you must use I, O and L pads following the wiring guide: http://www.madbeanpedals.com/tutorials/downloads/MBP_FootswitchWiring.pdf

eduardo_gj1

  • Diode Destroyer
  • *
  • Posts: 2
    • View Profile
Re: Leviathan help wiring
« Reply #2 on: March 14, 2019, 12:04:55 PM »
thanks for your answer, and yes you right hahaha was my mistake, but now i now see how is supposed to be wired