Author Topic: The Junction, plus an updated Hyperactive Hyperdrive  (Read 192 times)

Willybomb

  • Electron Doctor
  • *****
  • Posts: 1324
    • View Profile
    • RockStarGuitar
The Junction, plus an updated Hyperactive Hyperdrive
« on: July 13, 2019, 10:42:21 PM »
Nothing very exciting here...

Put together a junction box for my friend who I also built the Hyperactive Hyperdrive for.  Basically, it has two mic through, 3 1/4inch through, and a midi through so he can use the 4 cable method, hook up his vocal pedal, plus control his Bias Mini from his Boss switcher.

Also updated Hyperactive Hyperdrive.  Basically, cleaned all the gig crud off it, and replaced the plexi section with a Boneyard on vero.  It had one previously, but that was replaced with a Purple Plexi 800 on vero when the original Boneyard inexplicably stopped working.  Swapped the knobs out too.  Original thread here: http://www.madbeanpedals.com/forum/index.php?topic=21721.msg214328#msg214328

alanp

  • Electron Doctor
  • *****
  • Posts: 5437
    • View Profile
    • http://alanp.info/
Re: The Junction, plus an updated Hyperactive Hyperdrive
« Reply #1 on: July 14, 2019, 01:53:28 AM »
I'm impressed! How do trains fit through that first one? ;) :)
"Hot water, good dentishtry and shoft lavatory paper."
- Cohen the Barbarian, on what is greatest in life
My OSHpark shared projects
My website

Willybomb

  • Electron Doctor
  • *****
  • Posts: 1324
    • View Profile
    • RockStarGuitar
Re: The Junction, plus an updated Hyperactive Hyperdrive
« Reply #2 on: July 14, 2019, 06:44:01 AM »
They're tiny little trains for ants.