News:

Forum may be experiencing issues.

Main Menu

Mimik 15nf cap question

Started by mcallisterra, August 15, 2019, 04:36:41 PM

Previous topic - Next topic

mcallisterra

I recently got a friend of mine into building, and he purchased a Woodstork and Mimik to get started with. Somehow we missed out the 15n caps for the Mimik on the parts order, but I have a handful of 10n caps; would these work for C5, C12, and C15 in the Mimik, or does he need to put in a new order for the 15n caps?

Thanks!

Aleph Null

All three of those capacitors are connected to ground, so they'll be acting as low pass filters (sending highs to ground). Smaller values will raise the cut-off frequency: the repeats will be a little brighter. The effect will still work. You might notice more hiss in the repeats than you would with stock values.

Bio77

Do you have any 4n7s left over?  You could solder one with a 10n in parallel.

mcallisterra

Quote from: Bio77 on August 16, 2019, 12:11:00 AM
Do you have any 4n7s left over?  You could solder one with a 10n in parallel.
That's a good idea, but unfortunately I don't. Looks like we're placing another order. Thanks!

Sent from my BND-L24 using Tapatalk


madbean

I could throw in a few 15n in the mail to you if you want.

mcallisterra

Quote from: madbean on August 16, 2019, 12:23:33 PM
I could throw in a few 15n in the mail to you if you want.
Thanks so much Brian! PM incoming.

Sent from my BND-L24 using Tapatalk