News:

Forum may be experiencing issues.

Main Menu

Belton brick in the loop

Started by Adam_DIY, October 17, 2019, 12:35:36 PM

Previous topic - Next topic

Adam_DIY

Does anyone have experience of using belton brick based delays in a line level effects loop?  I've recently bought an egnater tweaker and as there's no reverb was going to build one but would like to use it in the loop and if they wont like line level I'll probably buy a hall of fame for the loop instead. 

benny_profane

I built a belton brick / PT2399 reverb for a synth friend of mine. I haven't heard any bad feedback, but I'll get back to you with specifics when I hear back. An option would be to include attenuation at the input of the circuit if the signal is too hot.

jkokura

I have a tweaker, and although I usually use my Strymon reverb, I have used Belton type reverb pedals in the loop as well. Worked fine.

Jacob
JMK Pedals - Custom Pedal Creations
JMK PCBs *New Website*
pedal company - youtube - facebook - Used Pedals

Adam_DIY

Excellent thanks for that now I just need to decide what to build I have a couple of reverb pcbs in the build pile I've been meaning to get to.