Author Topic: Mammoth Electronics and powder coated enclosures  (Read 638 times)

ddj3891

  • Diode Destroyer
  • *
  • Posts: 41
    • View Profile
Mammoth Electronics and powder coated enclosures
« on: November 07, 2019, 05:29:18 PM »
I was a fan of Mammoth Electronics' selection of enclosures.  They had more color options of powder coated boxes than any other resource I've used.  Does anyone know of another place that offers a selection other than black or white?

JoeR3155

  • Diode Destroyer
  • *
  • Posts: 43
  • Joe
    • View Profile
Re: Mammoth Electronics and powder coated enclosures
« Reply #1 on: November 07, 2019, 06:16:01 PM »
Tayda and Small Bear, but the colors are like the Crayola box of 8 crayons (red, yellow, blue...)
I don't believe I've actually destroyed any diodes, despite what you might hear

jrod

  • Transistor Tickler
  • **
  • Posts: 71
    • View Profile
Re: Mammoth Electronics and powder coated enclosures
« Reply #2 on: November 07, 2019, 06:16:50 PM »
Have you tried Pedal Parts Plus? www.pedalpartsplus.com



JoeR3155

  • Diode Destroyer
  • *
  • Posts: 43
  • Joe
    • View Profile
Re: Mammoth Electronics and powder coated enclosures
« Reply #3 on: November 07, 2019, 06:23:12 PM »
PPP has minimum buys now.  Thereís another thread in this forum called Mammoth Electronics acquisition that covers related topics
« Last Edit: November 07, 2019, 06:26:57 PM by JoeR3155 »
I don't believe I've actually destroyed any diodes, despite what you might hear

EBK

  • Electron Doctor
  • *****
  • Posts: 1265
  • Eric K.
    • View Profile
Re: Mammoth Electronics and powder coated enclosures
« Reply #4 on: November 08, 2019, 07:26:35 AM »
What we need are some forum members with their own powder coating setups.  I'd happily buy them the powder and some beverage of choice in exchange for the coating service.

(I really need to get off my butt and visit some local shops that powder coat wheel rims, motorcycle parts, etc.  I'm such an extreme introvert though.   ::))
Not affiliated with Oatey, makers of the world's best and most delicious* low tar solder paste. Ask for Oatey -- It's the juiciest!

*Solder paste is not food.  If ingested, seek medical help promptly.

EBK

  • Electron Doctor
  • *****
  • Posts: 1265
  • Eric K.
    • View Profile
Re: Mammoth Electronics and powder coated enclosures
« Reply #5 on: November 08, 2019, 07:31:40 AM »
Tayda and Small Bear, but the colors are like the Crayola box of 8 crayons (red, yellow, blue...)
Plus, here is Mammoth red (left) vs. Smallbear "red" (right):


Precoated Hammond brand boxes are nice though.  I've used them on several projects.  My Twilight Zone chorus is a Hammond cobalt blue, and the three pedals I somewhat recently listed for sale were stock Hammond purple, light gray, and orange.  I'll find some links if anyone really wants me to.
Not affiliated with Oatey, makers of the world's best and most delicious* low tar solder paste. Ask for Oatey -- It's the juiciest!

*Solder paste is not food.  If ingested, seek medical help promptly.

pickdropper

  • Electron Doctor
  • *****
  • Posts: 6090
    • View Profile
Re: Mammoth Electronics and powder coated enclosures
« Reply #6 on: November 08, 2019, 10:26:53 AM »
What we need are some forum members with their own powder coating setups.  I'd happily buy them the powder and some beverage of choice in exchange for the coating service.

(I really need to get off my butt and visit some local shops that powder coat wheel rims, motorcycle parts, etc.  I'm such an extreme introvert though.   ::))

Iíve started looking at local shops.  $175-200 minimum batch charges but at least you can mix enclosures sizes.  Iím not sure what the cost per box is.  They did say there would be an upcharge for any powder they donít stock (they have minimal options).
Function f(x)
Follow me on Instagram as pickdropper

harryklippton

  • Diode Destroyer
  • *
  • Posts: 24
    • View Profile
Re: Mammoth Electronics and powder coated enclosures
« Reply #7 on: November 08, 2019, 04:03:37 PM »
What we need are some forum members with their own powder coating setups.  I'd happily buy them the powder and some beverage of choice in exchange for the coating service.

(I really need to get off my butt and visit some local shops that powder coat wheel rims, motorcycle parts, etc.  I'm such an extreme introvert though.   ::))

Excuse my ignorance, but what does this entail? Spray gun, compressed air, a booth? I know what powder coating looks like but don't know how the process works.

EBK

  • Electron Doctor
  • *****
  • Posts: 1265
  • Eric K.
    • View Profile
Re: Mammoth Electronics and powder coated enclosures
« Reply #8 on: November 08, 2019, 04:17:20 PM »
From my understanding, it requires this:
High voltage spray gun to statically charge powder.
Small air compressor to propel the powder.
A very solid ground connection for the enclosure.
An oven with a good controller.
Paint powder.
Probably some chemical dips to clean and prepare the enclosure too. *shrug*

I reserve the right to be wrong as to the above items.  ;)
Not affiliated with Oatey, makers of the world's best and most delicious* low tar solder paste. Ask for Oatey -- It's the juiciest!

*Solder paste is not food.  If ingested, seek medical help promptly.

JoeR3155

  • Diode Destroyer
  • *
  • Posts: 43
  • Joe
    • View Profile
Re: Mammoth Electronics and powder coated enclosures
« Reply #9 on: November 08, 2019, 05:52:21 PM »

Plus, here is Mammoth red (left) vs. Smallbear "red" (right):



Love the engineering paper pad.  That stuff is the best!
I don't believe I've actually destroyed any diodes, despite what you might hear

EBK

  • Electron Doctor
  • *****
  • Posts: 1265
  • Eric K.
    • View Profile
Re: Mammoth Electronics and powder coated enclosures
« Reply #10 on: November 08, 2019, 07:02:37 PM »
Love the engineering paper pad.  That stuff is the best!
100% agree.   ;D
Not affiliated with Oatey, makers of the world's best and most delicious* low tar solder paste. Ask for Oatey -- It's the juiciest!

*Solder paste is not food.  If ingested, seek medical help promptly.

jimilee

  • Electron Doctor
  • *****
  • Posts: 7309
  • Jimi Lee
    • View Profile
Re: Mammoth Electronics and powder coated enclosures
« Reply #11 on: November 08, 2019, 09:04:14 PM »
Harbor freight has some small hobby powder coating guns, or did anyway, I havenít looked in a while.


Sent from my iPhone using Tapatalk
Pedal building is like the opposite of sex.  All the fun stuff happens before you get in the box.

Willybomb

  • Electron Doctor
  • *****
  • Posts: 1358
    • View Profile
    • RockStarGuitar
Re: Mammoth Electronics and powder coated enclosures
« Reply #12 on: November 08, 2019, 10:24:27 PM »
This is Tayda red.  There's a datapol sticker on top that is ferrari red via laser printer, taken from the sample tool in PS.  I'd say it's pretty close.

EBK

  • Electron Doctor
  • *****
  • Posts: 1265
  • Eric K.
    • View Profile
Re: Mammoth Electronics and powder coated enclosures
« Reply #13 on: November 09, 2019, 07:18:18 AM »
Harbor freight has some small hobby powder coating guns, or did anyway, I havenít looked in a while.


Sent from my iPhone using Tapatalk
This, plus an air compressor (haven't looked at those) would be good: 
https://www.harborfreight.com/10-30-psi-powder-coating-system-94244.html

As for an oven, I think I would (if I had the space) buy a used electric kitchen oven (might even be able to get one for free) and put several bricks in it to act as thermal capacitors.
Not affiliated with Oatey, makers of the world's best and most delicious* low tar solder paste. Ask for Oatey -- It's the juiciest!

*Solder paste is not food.  If ingested, seek medical help promptly.

jimilee

  • Electron Doctor
  • *****
  • Posts: 7309
  • Jimi Lee
    • View Profile
Re: Mammoth Electronics and powder coated enclosures
« Reply #14 on: November 09, 2019, 07:31:58 AM »
Harbor freight has some small hobby powder coating guns, or did anyway, I havenít looked in a while.


Sent from my iPhone using Tapatalk
This, plus an air compressor (haven't looked at those) would be good: 
https://www.harborfreight.com/10-30-psi-powder-coating-system-94244.html

As for an oven, I think I would (if I had the space) buy a used electric kitchen oven (might even be able to get one for free) and put several bricks in it to act as thermal capacitors.

A perfect powder coating gun for vehicles at home or the shop

I canít tell you how many times Iíve been in my car and needed to powder coat something....


Sent from my iPhone using Tapatalk
Pedal building is like the opposite of sex.  All the fun stuff happens before you get in the box.