Author Topic: How is babby formed?  (Read 11128 times)

BRGPollen

  • Transistor Tickler
  • **
  • Posts: 99
  • "B" (short for Barrett)
    • View Profile
    • B RehmGerdes on Facebook
Re: How is babby formed?
« Reply #45 on: February 17, 2012, 02:29:11 AM »
     I'm thinking up an idea that would have the 1590a's with no footswitch (ie always on) and a nice massive true bypass loop switcher.  I'm thinking it will still be pretty small and have ultimate rerouteing flexibility.  One drawback is that I would still be turning on each effect at a time instead of combinations. Believe me, I would love to have one of the GIG RIG boards to do all of the switching.  Money being what it is though, it's a little cost prohibitive.  I did see a switcher schem and doc at GGG using 8 sends and returns corresponding to dip switches and relays.  That's WAAAAAY over my head for now though!

     I'm still excited as hell though for these wee ones!!

"B"
The Musician's Theory of Relativity . . . . . E=Fb

cjkbug

  • Electron Doctor
  • *****
  • Posts: 575
  • cory
    • View Profile
    • My Tattoo Shop
Re: How is babby formed?
« Reply #46 on: February 18, 2012, 03:45:44 AM »
     I'm thinking up an idea that would have the 1590a's with no footswitch (ie always on) and a nice massive true bypass loop switcher.  I'm thinking it will still be pretty small and have ultimate rerouteing flexibility.  One drawback is that I would still be turning on each effect at a time instead of combinations. Believe me, I would love to have one of the GIG RIG boards to do all of the switching.  Money being what it is though, it's a little cost prohibitive.  I did see a switcher schem and doc at GGG using 8 sends and returns corresponding to dip switches and relays.  That's WAAAAAY over my head for now though!

     I'm still excited as hell though for these wee ones!!

"B"
check this out. it's a much cheaper alternative.
http://www.ebay.com/itm/220882453245?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649#ht_3880wt_1054
I got blisters on my fingers!!!

BRGPollen

  • Transistor Tickler
  • **
  • Posts: 99
  • "B" (short for Barrett)
    • View Profile
    • B RehmGerdes on Facebook
Re: How is babby formed?
« Reply #47 on: February 18, 2012, 11:31:25 PM »
CJKbug,
     WOW!!!  Totally not on my radar until today.  It smells too good to be true.  Cheaper than even the Carl Martin octo switch!!   Midi would make it awesome though (as I dream of buying my Strymon Timeline)!  I'm definitely hanging on to this when Brian releases all of the baby boards!!

     "B"
The Musician's Theory of Relativity . . . . . E=Fb

neiloler

  • Solder Ninja
  • ****
  • Posts: 249
    • View Profile
Re: How is babby formed?
« Reply #48 on: February 19, 2012, 11:34:10 PM »
I'd love some of these little baby builds and one of these guys controlling it all:

http://moenfx.com/gec9.html
OLERAudio - Sole proprietor, engineer, and goofball

ToasterMe

  • Diode Destroyer
  • *
  • Posts: 12
    • View Profile
Re: How is babby formed?
« Reply #49 on: February 24, 2012, 12:26:52 PM »
Am I the only person tempted to throw a mini-delay board into a Current Lover to have the option of Thru-Zero Flanging?

Scruffie

  • Electron Doctor
  • *****
  • Posts: 2808
    • View Profile
Re: How is babby formed?
« Reply #50 on: March 01, 2012, 05:54:44 AM »
Am I the only person tempted to throw a mini-delay board into a Current Lover to have the option of Thru-Zero Flanging?
If you mean one of these PT2399 baby boards it wont work, the TZF line needs to be incredibly short, at max 10mS probably 1mS or less would be better and a PT2399 will only get as short as around 30-50ms at best.
Works at Lectric-FX

culturejam

  • Electron Doctor
  • *****
  • Posts: 4368
  • Function f(x)
    • View Profile
Re: How is babby formed?
« Reply #51 on: March 01, 2012, 08:27:40 AM »
I still wanna know who "babby" is.  ;D

thetrend77

  • Solder Ninja
  • ****
  • Posts: 285
  • Jacob
    • View Profile
Re: How is babby formed?
« Reply #52 on: March 01, 2012, 08:57:29 AM »
I still wanna know who "babby" is.  ;D

+1 lol

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 9021
  • Brian
    • View Profile
    • madbeanpedals
Re: How is babby formed?
« Reply #53 on: March 01, 2012, 09:31:38 AM »
I own madbeanpedals (duh). I am part owner of Function F(X).

culturejam

  • Electron Doctor
  • *****
  • Posts: 4368
  • Function f(x)
    • View Profile
Re: How is babby formed?
« Reply #54 on: March 01, 2012, 10:01:05 AM »
Awesome!

I figured it wasn't just a speeeeellling mistake.  ;D

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 9021
  • Brian
    • View Profile
    • madbeanpedals
Re: How is babby formed?
« Reply #55 on: March 01, 2012, 10:30:59 AM »
The internet is awesome.
I own madbeanpedals (duh). I am part owner of Function F(X).

Haberdasher

  • Electron Doctor
  • *****
  • Posts: 2834
  • "El Duder-ino"
    • View Profile
Re: How is babby formed?
« Reply #56 on: March 01, 2012, 12:52:15 PM »
haha I was wondering what the babby thing was.  that was hilarious, especially how the 2nd caveman pushed the other out of the way to go off on his tangent.  I'll be thinking about that all day now.

<a href="http://www.youtube.com/watch?v=Ll-lia-FEIY" target="_blank">http://www.youtube.com/watch?v=Ll-lia-FEIY</a>
Looking for a discontinued madbean board?  Check out my THREAD

FABRICATED PCB's FOR SALE:

culturejam

  • Electron Doctor
  • *****
  • Posts: 4368
  • Function f(x)
    • View Profile
Re: How is babby formed?
« Reply #57 on: March 01, 2012, 02:08:03 PM »
Aww man. I'm cracking up listening to that.  ;D

claytushaywood

  • Electron Doctor
  • *****
  • Posts: 585
    • View Profile
Re: How is babby formed?
« Reply #58 on: March 16, 2012, 12:37:25 PM »
     I'm thinking up an idea that would have the 1590a's with no footswitch (ie always on) and a nice massive true bypass loop switcher.  I'm thinking it will still be pretty small and have ultimate rerouteing flexibility.  One drawback is that I would still be turning on each effect at a time instead of combinations. Believe me, I would love to have one of the GIG RIG boards to do all of the switching.  Money being what it is though, it's a little cost prohibitive.  I did see a switcher schem and doc at GGG using 8 sends and returns corresponding to dip switches and relays.  That's WAAAAAY over my head for now though!

     I'm still excited as hell though for these wee ones!!

"B"
check this out. it's a much cheaper alternative.
http://www.ebay.com/itm/220882453245?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649#ht_3880wt_1054

Do you own that loop switcher?  the page is, how do you say, poorly marketed... ha you think if you could build this thing and sell it for $170 youd be smart enough to scan the printed instruction manual straight (why scan who knows) or use black and white instead of green on yellow... that worries me

pietro_moog

  • Solder Ninja
  • ****
  • Posts: 291
    • View Profile
Re: How is babby formed?
« Reply #59 on: March 16, 2012, 06:43:54 PM »
a 1590a noise reduction pedal would be nice