A Skreddy ?Lady approximation with mid pot for the scoop.

Big thanks to sgmezei for the mudbunny board.

Here's the component values for the mudbunny board.

R1 1M

R2 33K

R3 100K

R4 470K

R5 100R

R6 18K

R7 820R

R8 8K2

R9 56K

R10 470K

R11 100R

R12 10K

R13 8K2

R14 100K

R15 470K

R16 100R

R17 18K

R18 33K (6K8 if using mid pot)

R19 33K

R20 390K

R21 100K

R22 10K (original ?Lady has 8K2+2K7 and takes output from the junction between them)

R23 2K7

R24 jumper

R25 additional 8K2 connected to tone pot wiper from pad, on reverse of board

C1 10UF

C2 470PF

C3 220NF

C4 220NF

C5 470PF

C6 1UF

C7 330NF

C8 470PF

C9 100NF

C10 5.6NF

C11 10NF (15nf if using mid pot, adjusted to stop scooping high mids)

C12 100NF

C13 100NF

C14 100UF

C15 not used

D1-D4 1N4148

D5 1N4001

Q1 2N5088

Q2 BC549C

Q3 BC549C

Q4 BC109C

Original is Q1-Q3 2N5133, Q4 BC109C. Above combo gave a very close approximation of original. The original has a little more sparkle on the top end.

SUS 100KB

TONE 100KB

VOL 100KB

MID 47KB (50-60% is very close to version without mid pot). 50KB will be OK.