Author Topic: A Tooth and a half  (Read 1045 times)

lincolnic

  • Electron Doctor
  • *****
  • Posts: 2272
    • View Profile
A Tooth and a half
« on: January 05, 2011, 09:24:41 PM »
Finished putting together my Sabertooth today. I used to have a Mammoth, but I sold it a while ago. I'm glad to have this sound again. Bright white LED! I had to splice my LED wires because I made the awesome mistake of soldering it to the board before I remembered that I had to load the bezel from the outside of the enclosure. Derp.

I relabeled the "Bite" knob as "Pulse Width", since I like to know what the control's actually doing.



The enclosure's a little scratched because I forgot to tape over it before I started drilling.



I also built another one, but I only have a quick phone picture of it. No gutshot. I made it for a friend of mine who is an actual rock star - it's a pretty good feeling to know that something you made will be used by someone who actually plays music for a living.


nzCdog

  • Electron Doctor
  • *****
  • Posts: 3665
  • Corey - Christchurch, NZ
    • View Profile
    • Soundcloud
Re: A Tooth and a half
« Reply #1 on: January 05, 2011, 09:57:46 PM »
nice job!  ;D

stecykmi

  • Electron Doctor
  • *****
  • Posts: 1020
  • Misha
    • View Profile
Re: A Tooth and a half
« Reply #2 on: January 05, 2011, 11:48:36 PM »
very nice. i like this circuit a lot, i've never played a bass distortion that sounds quite so thick and woolly.