Anyone got one?
Jon Patton's (midwayfair's) perf layout worked in a 1590a if I remember correctly (look for his Cappuccino Fuzz build report). You could get that etched by Haberdasher on copper clad if you don't do perfboard.
I've thought about it but haven't done it yet. One of these years.
I'm almost certain I have a 1590a layout in my eagle files at home. I will check and if I find it I can share the project on Oshpark and you could order a set of PCBs. Only caveat is I won't be home to check until Wednesday evening. I will keep you posted.
Quote from: Stomptown on August 29, 2016, 06:05:05 PM
I'm almost certain I have a 1590a layout in my eagle files at home. I will check and if I find it I can share the project on Oshpark and you could order a set of PCBs. Only caveat is I won't be home to check until Wednesday evening. I will keep you posted.
Sweet. I'm up for building one of these too. ;)
As noted above, this perf layout will fit a 1590A (with the usual wiring ninja voodoo nonsense these tiny enclosures require).
Credit to Jon Patton
I could have sworn I made an etchable version of that layout. Maybe for haveyouseenhim ... who I haven't seen around for a quite while. :P
Quote from: midwayfair on August 30, 2016, 02:54:06 PM
I could have sworn I made an etchable version of that layout. Maybe for haveyouseenhim ... who I haven't seen around for a quite while. :P
I think Mike's (haveyouseenhim) switched his attention to shooting lead rather then melting it.
dave
I found this in my eagle files and shared it through Oshpark. I added a link to the schematic which lists the stock values. Enjoy!
https://oshpark.com/shared_projects/WsWUOAej
Brilliant! Thanks for this :-)