News:

Forum may be experiencing issues.

Main Menu

Transformer isolated A/B/Y layout

Started by Beedoola, July 02, 2020, 05:56:24 AM

Previous topic - Next topic

Beedoola

I just got the transformers for this but I'm not sure how to read the pins on the transformer from the schematic. Can anyone take a look at this?

http://www.geofex.com/FX_images/TransformerSplitter.pdf

TFZ

Using this: https://www.mouser.de/datasheet/2/449/XC-600134-1212477.pdf

Primary side (left) in the schematic: pin 1 is signal, pin 3 ground.
Secondary side: pin 4 to the jack tip, pin 6 to sleeve.

Beedoola