Title: VFE Switching Board - OSHPark
Post by: madbean on November 14, 2018, 12:05:18 PM
Post by: madbean on November 14, 2018, 12:05:18 PM
In case you ever need a replacement switching board I've made it available at OshPark. Keep in mind this does not include the MCU, which you should already have if you just need a replacement PCB. In some cases, I can send a replacement instead of going through OSH Park. It just depends on how many PCBs I have at any given time. But, this option is available to you.
Title: Re: VFE Switching Board - OSHPark
Post by: Aentons on November 14, 2018, 02:50:19 PM
Post by: Aentons on November 14, 2018, 02:50:19 PM
Is it safe to assume that the MCU included with the v2 boards will also work in the v1 switching boards? I was thinking of having a few of the v1's made at some point.
Title: Re: VFE Switching Board - OSHPark
Post by: Feral Feline on November 14, 2018, 05:00:00 PM
Post by: Feral Feline on November 14, 2018, 05:00:00 PM
Thank you, sir.
Title: Re: VFE Switching Board - OSHPark
Post by: madbean on November 14, 2018, 05:21:54 PM
Post by: madbean on November 14, 2018, 05:21:54 PM
Quote from: Aentons on November 14, 2018, 02:50:19 PM
Is it safe to assume that the MCU included with the v2 boards will also work in the v1 switching boards? I was thinking of having a few of the v1's made at some point.
Yup!
Title: Re: VFE Switching Board - OSHPark
Post by: Mich P on February 26, 2019, 01:25:54 PM
Post by: Mich P on February 26, 2019, 01:25:54 PM
Is there an OSHPark with version 1 of the VFE switching Board ?
Thank you,
Mich P.
Thank you,
Mich P.
Title: Re: VFE Switching Board - OSHPark
Post by: Aentons on May 22, 2019, 01:25:45 AM
Post by: Aentons on May 22, 2019, 01:25:45 AM
Quote from: Mich P on February 26, 2019, 01:25:54 PM
Is there an OSHPark with version 1 of the VFE switching Board ?
Thank you,
Mich P.
Sorry I missed your comment. On the VFE site you can buy a package of all their Eagle boards for $10
Title: Re: VFE Switching Board - OSHPark
Post by: Mich P on May 22, 2019, 06:27:54 AM
Post by: Mich P on May 22, 2019, 06:27:54 AM
Thanks, Jalmonsalmon kindly send me the link :
https://oshpark.com/shared_projects/gfVY85Jg
https://oshpark.com/shared_projects/gfVY85Jg
Title: Re: VFE Switching Board - OSHPark
Post by: Aentons on June 28, 2020, 02:09:09 AM
Post by: Aentons on June 28, 2020, 02:09:09 AM
Any chance of getting the V2 switching board as an Oshpark share?
Title: Re: VFE Switching Board - OSHPark
Post by: nimbleswitch on October 23, 2021, 11:54:26 PM
Post by: nimbleswitch on October 23, 2021, 11:54:26 PM
Is there any open-source code that would work with this board?
I see Coda Effects has some available code (https://www.coda-effects.com/2016/08/relay-bypass-with-anti-pop-system.html), but uses a different pinout from the MCU so I have to assume it won't work with this board.
I see Coda Effects has some available code (https://www.coda-effects.com/2016/08/relay-bypass-with-anti-pop-system.html), but uses a different pinout from the MCU so I have to assume it won't work with this board.
Title: Re: VFE Switching Board - OSHPark
Post by: jimilee on October 24, 2021, 12:33:07 AM
Post by: jimilee on October 24, 2021, 12:33:07 AM
Unless you just have to have V2, it's cheaper to just get the V3 from Brian. Either way, you'd need the MCU.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Title: Re: VFE Switching Board - OSHPark
Post by: Aentons on October 24, 2021, 02:05:02 AM
Post by: Aentons on October 24, 2021, 02:05:02 AM
Quote from: jimilee on October 24, 2021, 12:33:07 AMI'm using the switch jack holes on the v2 for strain relief on the modular connections. V3 doesn't have them. Plus v2 has better power connectors than v1
Unless you just have to have V2, it's cheaper to just get the V3 from Brian. Either way, you'd need the MCU.
Title: Re: VFE Switching Board - OSHPark
Post by: jimilee on October 24, 2021, 02:09:37 AM
Post by: jimilee on October 24, 2021, 02:09:37 AM
Quote from: Aentons on October 24, 2021, 02:05:02 AMGotcha, I've only got the one shown above also. You might email Brian.Quote from: jimilee on October 24, 2021, 12:33:07 AMI'm using the switch jack holes on the v2 for strain relief on the modular connections. V3 doesn't have them. Plus v2 has better power connectors than v1
Unless you just have to have V2, it's cheaper to just get the V3 from Brian. Either way, you'd need the MCU.
Sent from my iPhone using Tapatalk