News:

Forum may be experiencing issues.

Main Menu

Blueprint Oscillation Problem

Started by PangeaDestructor, November 12, 2021, 04:41:33 PM

Previous topic - Next topic

PangeaDestructor

I put together the VFE Blueprint project, got it working. If I so much as look at the Echo knob, it sends the effect into pretty extreme oscillation, distorted repeats with each one growing in volume and distortion until I zero the Echo knob or shut off the pedal. Thought it might be a bad PT2399, but I've swapped at least 6 times with no change, so it has to be something on the board. Anyone experienced this or have any idea what could be the cause?

PangeaDestructor

Crap, I think I just figured it out. Looks like I accidentally swapped the Time and Echo pots. That would do it.

PangeaDestructor

Nevermind, that actually made it worse.

jimilee

Without seeing any close up pictures of the back, it sounds like there's either a solder bridge or an incorrect resistor value.
Pedal building is like the opposite of sex.  All the fun stuff happens before you get in the box.