Topics

How to add a battery to the V3 board.
The PDF instructions mentions using a battery option that bypasses the switching board.
Any instructions on how to add battery power to anything using the V3 switching board?
Thanks!

Madbean,

I would like to make a VFE Fuzz Duo. I see this pedal in the shop list. Do you have a PCB for this pedal?

Thank you!

Switching problem on the Dragon.
LED is switching on and off but the signal is still going through the pedal. Pedal itself is not switching...always on. Any idea what part of the circuit is not functioning?
All the controls are functioning properly, just not switching off.

Thanks!

Just finished a VFE Standout
LPF is not working at all in any configuration.
HPF seems to be working properly.
When the toggle switch is put into the 12dB setting the HPF stops working as well...so in that toggle position neither filters are working.
Did my best to check for errors in the build.
Any help anyone is will to offer would be greatly appreciated.
Picture attached
Thank You

Building a VFE dragon. Question with one of the three diodes. I have the 1N4148 and 1N5817 correctly figured out.
List of parts on PCB layout diagram and BOM lists a 20v Zenner(directly east of the 12F509)
The PCB itself and he PCB layout diagram has 18v for the Zenner diode.
Which one is correct?

Thanks!