News:

Forum may be experiencing issues.

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - morgcl

#1
Open Discussion / Re: Tayda discount code!!!!
June 15, 2013, 08:59:18 PM
Thank you sir!!
#2
Open Discussion / Active/Passive Volume Pedal Mod
June 04, 2013, 09:09:20 PM
I've got a Ernie Ball VP Jr. that I'm looking to install a buffer in and make it active. Two reasons for this. I want to put a buffer at the beginning of my chain, and I want to be able to utilize the Tuner Out without the "tone suck" happening. So, I bought an A. Zilt's Micro Buffer/Splitter from Jacob a couple months ago and was looking to use that as the buffer and the splitter for the Tuner Out. Pretty easy, ya? Then I had to go and make things more complex for myself. haha.

I'm looking at putting in a switch to be able to switch from an active, buffered, tuner out volume pedal to a simple in and out, non-buffered volume pedal. I drew up something and it seems like it should work, but I wanted to run it by some people who are a lot smarter at this than me.

So, here's the drawing I put together really quick. Will that work?



A couple of notes on this:

- There is a CLR on the PCB so that's not shown.

- I've got an On/Off/On DPDT switch in my stock. Do I need to get a strictly On/On switch?


Thanks guys!
#3
Build Reports / Re: Multiplex
May 30, 2013, 04:37:02 AM
So clean looking! Great work!
#4
So pro!
#5
I believe it's pins 3 and 4. Don't quote me on that though....  :P

You'll have to have Josh confirm. He's the pro with these things.
#6
This is fantastic!!!  :o
#7
With enclosures like that you don't need gut shots. So pro. Inspired...