Touchstone problems

[Stratosphere]

Hey guys, I'm stumped on this one. I built a touchstone and I have some issues to trace down. I have signal in bypass, but not when I engage the pedal, the led lights up, but there's no signal coming through. My voltages are as follows:

IC1 pin 1-8, 8.38, 8.35, 0, 0, 0, 8.01, 8.40, 9.06

IC2 8.41, 4.18, 5.83, 0, 4.18, 5.58, 5.58

IC3 8.26, 80mv, 7.54, 8.41, 8.41, 0, 0, 0, 4.18, 4.18, 0, 8.28, 8.41

IC4 1.74, 4.10, 4.06, 0, 2.22, 2.22, 4.12, 9.06

IC1 has some funky voltages, but I'm not finding the issue. Any help is appreciated!