News:

Forum may be experiencing issues.

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - mcallisterra

#1
Build Reports / Re: MBP Woodstork
August 23, 2019, 10:57:15 PM
I gotta make one.

Sent from my BND-L24 using Tapatalk

#2
Build Reports / Re: Handprint Rub-a-Dub Reverb
August 22, 2019, 08:53:24 PM
Photos should be working again now. Thanks for letting me know!

Sent from my BND-L24 using Tapatalk

#3
Build Reports / Re: Bad Head (Doombutter)
August 17, 2019, 10:06:22 PM
Quote from: Hexjibber on August 17, 2019, 06:18:59 AM
That's a cool etch, the distressed look is great! Really like the design and layout you've used, winner all round!


Sent from my iPhone using Tapatalk

Thank you! I'm glad it's a circuit that kinda fits the distressed look because it was not a very successful etch. The reverse ones are hard since the reaction gets out of control so fast from a temperature standpoint!
#4
Build Reports / Re: Bad Head (Doombutter)
August 17, 2019, 10:05:15 PM
#5
Build Reports / Handprint Rub-a-Dub Reverb
August 17, 2019, 10:04:08 PM
Here's my latest build - a 1776 Effects Rub-a-Dub Reverb!



I've had this circuit built for a while, but only just boxed it up this week. My 5 year old boy did the artwork for it, and I love how it came out! Acryclic paints over a black powdercoated enclosure, clear coated with some Minwax water based polyurethane. Hopefully one day he can be rocking it, since he's already super into my guitars (and I have a Loog waiting for his birthday next week).

Great sounding simple little reverb, perfect for my little practice amp that doesn't have any on board!
#6
Build Reports / Re: Spaceman Effects Gemini III
August 17, 2019, 06:48:51 AM
That etch is awesome! I love the design, excellent work.

Sent from my BND-L24 using Tapatalk

#7
Build Reports / Re: Bad Head (Doombutter)
August 17, 2019, 12:36:51 AM
Quote from: pickdropper on August 17, 2019, 12:25:35 AM
Man, that etch is nice.
Appreciate it! I'm kinda glad the circuit fit a worn look, because if I'm honest I didn't have to try hard to get it. Good job I wasn't going for a pristine one here!

Sent from my BND-L24 using Tapatalk

#8
Build Reports / Re: Bad Head (Doombutter)
August 16, 2019, 11:39:09 PM
Quote from: Leevibe on August 16, 2019, 09:01:12 PM
Beautiful job!! I really love this inside and out.
Thanks!

Sent from my BND-L24 using Tapatalk

#9
Build Reports / Bad Head (Doombutter)
August 16, 2019, 06:03:05 PM
I built a Doombutter (Mid-Fi Clarinot) a few years back but didn't really put any effort into the enclosure. I found it tough remembering what the controls did without labels so I sold it and decided to build another with an etched enclosure this time. Both times I used Haberdasher's awesome etch of the Doombutter (thanks Keefe!).

I went with a worn-out looking etch to match the vibe of the circuit.

Such a fun circuit, and very musical and usable at the less-than-crazy settings!




#10
Open Discussion / Bad Head (Doombutter)
August 16, 2019, 06:01:32 PM
I built a Doombutter (Mid-Fi Clarinot) a few years back but didn't really put any effort into the enclosure. I found it tough remembering what the controls did without labels so I sold it and decided to build another with an etched enclosure this time. Both times I used Haberdasher's awesome etch of the Doombutter (thanks Keefe!).

I went with a worn-out looking etch to match the vibe of the circuit.

Such a fun circuit, and very musical and usable at the less-than-crazy settings!








Sent from my BND-L24 using Tapatalk

#11
General Questions / Re: Mimik 15nf cap question
August 16, 2019, 02:26:48 PM
Quote from: madbean on August 16, 2019, 12:23:33 PM
I could throw in a few 15n in the mail to you if you want.
Thanks so much Brian! PM incoming.

Sent from my BND-L24 using Tapatalk

#12
General Questions / Re: Mimik 15nf cap question
August 16, 2019, 05:19:26 AM
Quote from: Bio77 on August 16, 2019, 12:11:00 AM
Do you have any 4n7s left over?  You could solder one with a 10n in parallel.
That's a good idea, but unfortunately I don't. Looks like we're placing another order. Thanks!

Sent from my BND-L24 using Tapatalk

#13
General Questions / Mimik 15nf cap question
August 15, 2019, 04:36:41 PM
I recently got a friend of mine into building, and he purchased a Woodstork and Mimik to get started with. Somehow we missed out the 15n caps for the Mimik on the parts order, but I have a handful of 10n caps; would these work for C5, C12, and C15 in the Mimik, or does he need to put in a new order for the 15n caps?

Thanks!
#14
Open Discussion / Mimik 15nf question
August 15, 2019, 04:29:51 PM
A recently got a friend of mine into building, and he purchased a Woodstork and Mimik to get started with. Somehow we missed out the 15n caps for the Mimik on the parts order, but I have a handful of 10n caps; would these work for C5, C12, and C15 in the Mimik, or does he need to put in a new order for the 15n caps?

Thanks!

Sent from my BND-L24 using Tapatalk

#15
Open Discussion / Mimik 15nf question
August 15, 2019, 04:23:07 PM
A recently got a friend of mine into building, and he purchased a Woodstork and Mimik to get started with. Somehow we missed out the 15n caps for the Mimik on the parts order, but I have a handful of 10n caps; would these work for C5, C12, and C15 in the Mimik, or does he need to put in a new order for the 15n caps?

Thanks!

Sent from my BND-L24 using Tapatalk