I've recently build two effects using pcbs from pedalpcb.com for a friend that is playing in the band "Cynic Circus". Not quite my cup of tea, but all of the guys are cool to talk to and super friendly.
First build is a Fortin 33 boost (basically a TC electronic Integrated Pre), the second a Airis Savage Drive. Went together well and I am happy with the results. The 33 has too much treble for his taste, so I'll install an internal trimmer to alter that.
(http://felix.kalium.org/upload/pictures/Pedals/33-boost/33_1_small.jpg) (http://felix.kalium.org/upload/pictures/Pedals/33-boost/33_1_big.jpg) (http://felix.kalium.org/upload/pictures/Pedals/33-boost/33_2_small.jpg) (http://felix.kalium.org/upload/pictures/Pedals/33-boost/33_2_big.jpg)
(http://felix.kalium.org/upload/pictures/Pedals/33-boost/33_3_small.jpg) (http://felix.kalium.org/upload/pictures/Pedals/33-boost/33_3_big.jpg)
(http://felix.kalium.org/upload/pictures/Pedals/Savage/Savage1_small.jpg) (http://felix.kalium.org/upload/pictures/Pedals/Savage/Savage1_big.jpg) (http://felix.kalium.org/upload/pictures/Pedals/Savage/Savage_2_small.jpg) (http://felix.kalium.org/upload/pictures/Pedals/Savage/Savage_2_big.jpg)
Envirotex finish? Do you pour then drill or vice versa? Looks slick!
Spiffin! 8)
thank you
Quote from: Aleph Null on July 30, 2019, 08:51:07 PM
Envirotex finish? Do you pour then drill or vice versa? Looks slick!
yup, both are finished with envirotex as per Juansolo and Cleggy's tutorial. Drill the enclosure, paint and sand, tape the holes from the bottom, pour envirotex and drill out the holes again.
You can also find the procedure in my etching tutorial linked in my signature
Looks great! Nice wiring, too.