News:

Forum may be experiencing issues.

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Aentons

#211
Build Reports / Re: four phab phasers
January 16, 2022, 03:13:22 AM
Holyfrijoles...me likey
#212
Open Discussion / Re: What is everyone doing????
January 14, 2022, 05:00:08 PM
I'm in the SG club too... Mine is a 2005 Standard in Natural Burst. The mid-2000's had the thicker 50's necks that I very much prefer over the thin 60's profile that everything else seems to have.
#213
Build Reports / Re: Slow loris
January 14, 2022, 04:45:22 PM
Quote from: jimilee on January 14, 2022, 02:37:57 AM
Quote from: Aentons on January 14, 2022, 12:07:45 AM
What do you guys think about the metal can 308 vs the dip chips? I have a metal can from small ear and I've noticed that when embiggening the 30pf compensation cap a bit to 68 or 100 the metal can go into melt down whereas the dip does not. I'm curious if you've noticed any differences as well
Now, when you say meltdown, how do you mean?
When you put a hot signal into it and it spits and sputters and cuts in and out
#214
Build Reports / Re: Slow loris
January 14, 2022, 12:07:45 AM
What do you guys think about the metal can 308 vs the dip chips? I have a metal can from small ear and I've noticed that when embiggening the 30pf compensation cap a bit to 68 or 100 the metal can go into melt down whereas the dip does not. I'm curious if you've noticed any differences as well
#215
VFE Projects / Re: VFE Resistor question
January 13, 2022, 06:55:17 PM
Yes
#216
Quote from: jimilee on January 11, 2022, 03:08:55 AM
Quote from: cooder on January 11, 2022, 02:49:26 AM
^ that does look like an early case of photoshopping though...
Yeah, I'm thinking a shot gun blast would have obliterated it.
It's a famous "doctored" photo . And that's a rifle. :)
#218
It looks fantastic.

You could try sub-ing that 062 with a lower noise part like an 072
#219
Build Reports / Re: EHX Freedom Preamp
January 10, 2022, 01:50:49 AM
I definitely remember it...
https://youtu.be/2eGWW8KOQio
#220
Holy shit... This the best rap I've heard in a long , long time



https://youtu.be/8XHaKkRc10w
#221
Quote from: cooder on January 07, 2022, 02:01:41 AM
Quote from: Aentons on January 06, 2022, 11:55:28 PM
Maybe I missed it... Is there anything that leads us to believe that this will be a phaser other than us talking about it? I think we are looking at another Fuzz Tone reissue.
You're probably right there...
Still that PS-1A would be nice to do, whatever Gibson decides or comes up with doesn't change that.
Oh absolutely, I hope they do a whole lineup rather than just the fuzz like they did several years back. That would be great.
#222
Maybe I missed it... Is there anything that leads us to believe that this will be a phaser other than us talking about it? I think we are looking at another Fuzz Tone reissue.
#223
Quote from: jimilee on January 06, 2022, 06:04:04 PM
Quote from: Drew Hallenbeck on January 06, 2022, 05:30:04 PM
Wasn't the Madbean "Stage Fright" board a recreation of the Maestro Phaser?
That's exactly what I was thinking too.


Sent from my iPhone using Tapatalk
I think the Stage Fright was based on the later model with the funky two knobs on the side enclosure
#224
They should just use this ad

https://youtu.be/mCI1Jb0Fqlo


Edit: oh, wait... The new ad is for the Fuzz tone... bummer
#225
Open Discussion / Re: Rat palisades style
January 06, 2022, 05:41:49 PM
Quote from: jimilee on January 06, 2022, 04:31:13 PM
Is there a rat pedal, like the palisades but based on a rat instead of a screamer? I was thinking of modifying a schematic to do just that.


Sent from my iPhone using Tapatalk
VFE Alpha Dog... more of a Dunes tho