The «MoM» - Build Log

[GrindCustoms]

The « Mass of Muff » project.

Decided to make a build log of this built as i go through it, makes a while that i'm planning it, was just not taking the time (or guts) to get at it.

So here we go!

All built on Pickdropper's MiniMuffin BMP layout.

The transistors used are sets that Marauder have put together.

Much thanks to Dave and Cleggy for helping me make this project real among other good folks (to be seen further in the progres) that have also took part in this stupid idea!

Group Shot!



Each of the circuit with some Si hfe geeking...

Mayo

Q1: 2SC1327-516
Q2: 2SC1327-490
Q3: 2SC1327-532
Q4: 2SC1327-473



Green Russian

Q1: BC549C-473
Q2: BC549C-473
Q3: BC549C-475
Q4: BC549C-467



UltraStoner

Q1: 2SC1327-542
Q2: 2SC1327-487
Q3: 2SC1327-558
Q4: BC109C-525



TSM680

Q1: 2SC1570-297
Q2: BC109C-555
Q3: BC109C-547
Q4: 2SC1570-290



'71 Triangle

Q1: 2SC1327-481
Q2: 2SC1327-470
Q3: 2SC1327-506
Q4: 2SC1327-438



?Lady

Q1: 2SC1327-539
Q2: 2SC1327-490
Q3: 2SC1327-542
Q4: BC109C-534



P19

Q1: BC550C-539
Q2: BC550C-563
Q3: BC550C-574
Q4: BC550C-545



Creamer Dreamer

Q1: 2N5089-651
Q2: 2N5089-762
Q3: 2N5089-890
Q4: 2N5089-538




The only circuit that had a «standard» pinout is the P19, got me some good practice at trannie leg twisting.

More to come later!

Rej

[jubal81]

Damn. This is going to be epic. Interested to see the switching arrangement.

[selfdestroyer]

I AM SO EXCITED... deep breath.. deep breath. This is going to be, dare I say, epic! Cant wait to see it done Rej.

I have been sitting on 5 of those PCBs also and wanted to make a 3 in one at one point. Might have to work on that this summer.

Cody

[alanp]

Can't wait to see the 2P8T switch you're going to use

[pickdropper]

I really wish you'd do an ambitious build one of these days, Rej.  You're more than capable.  ;-P

[sturgeo]

So 8 BMPs in 1 enclosure?? 
8 sets of pots or are you going to get fancy with relays 

Not throwing in an IC Muff for good measure? 

Eagerly waiting in anticipation!

[wgc]

I won't be impressed until you do it in 3d with bare solid wire.

Kidding.

[kothoma]

Can't wait to see the 2P8T switch you're going to use

Can't wait to see the order switching system you're going to use 

[muddyfox]

No pressure! 

[jimilee]

That's a lot of muff sir! Must be a guitar player....

[icecycle66]

Can't wait to see the 2P8T switch you're going to use

That's the same thing I said.

[GrindCustoms]

Hehe, thanks for the funky comments guy

All of this is going in a 1590D, the 8 muffs are grouped in bank of 4, that you select wich one to use via a rotary switch. Master bypass on each banks. All mechanical.

No IC Muff in this one.... but there's plenty of other Muff variant to build 2 or 3 other of these... so who knows!

[lincolnic]

Don't forget to include a switch to turn all of them on at once.   

[cooder]

Wickedness! Looking forward to seeing it boxed up. What a project!

[chuckbuick]

Outta be interesting.  I'm looking forward to seeing how this one develops, Rej.